开云体育

Look up VAC (Virtual Audio Cable).? There is a free version that allows output to both the speakers and the USB dongle that you would use to connect audio to the uBITX.? It acts like a Y cable in

Question on ubitx audio via cat. This is going to sound stupid but how do you get audio out from the computer when running ft5 or wspr? I have messed with this and I can not get the computer to output

Peter, I had to look at my notes on the two driver transistors as to why I did not change them. It was not because of extra heating it was because I was looking for a constant output on all bands or

Peter, I left the 22 ohm resistors in. I did not double up the smd emitter resistors for the two drivers. I changed the predriver emitter to 8.6 ohms. Q90, I did not mess with. When I doubled up the

Thanks for the response Barry, much appreciated. I order some of ebay uk today, I got 5 for around 12 GBP so not too bad. This definitely looks like a worthwhile mod on the v6, can you provide any

It appears that the microphone that came with the kit does not work. R1 Value in the mic was .07mV. Should have been 1.8 V. So now I have bought another Mic, it is a BETC but has 2 prong connectors.

Hi Ted, can you share more details on your 5109 mod, I can mostly what you have done from the attached image but did you change any other components as well ? What changes did you make to the

Peter, yes I did! The 5109 give more power out on the upper bands but not more on 80, 40, 30 or 20. Off the top of my pointed head, I would say about double the output power vs the stock 3904 devices.

Evan hand, success!!! Thank you, that worked like a charm! Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent: Wednesday, July 1, 2020 2:05:25 AM To: [email protected]

Barry, did you install the 2n5109's yet ? Interested in this mod for my v6 and would love to know what improvement you see over the 2n2222a's.

Ordered om 6/15/2020 and it got here 6/29/2020.?? Once it was shipped DHL it took 3 days.? They explained the shipping delay was that they ran out of knobs.? Corona-19 may have slowed their knob

Hi Curt, Thanks for the revert. I have tried to set the BFO to the best signal on 20m but even then it is distorted. There is also a 2Khan- ve shift. I read on the forum a out a separate audio amp

Sir, Your store at inkits.in is offline? Please clarify.

Looks pretty. Congrats. Sarma vu3zmv

Hello Friends We had promised a new kit for Bitx are ready now and available in limited numbers. The Easy Bitx kit is a mono bander kit which can be used for 20mt 40mt or 80mt band. Te kit is sold as

Rajesh, Always mention which version of Bitx/uBitx you are asking about! Raj, vu2zap

I'm running R1.5.0, and it works on WSJT-X no problem for me. Here's a screenshot of my settings: I've also used R1.5.0 with fldigi. I've attached the XML file (FT-817.xml) to this message, and here's

Good catch Dan! Fixed the pdf thank you. 73 -- David N8DAH Kit-Projects.com ( http://www.kit-projects.com ) Shop is open! ( Https://Shop.Kit-Projects.com )

Rajesh Do listen with headphones to see if audio is still very distorted. These boards usually arrive with the BFO not properly adjusted. If the signal is coming too close or beyond the edge of the

Many thanks, David. It's all working. I *do* notice a drop in overall volume. Just an FYI for your documentation: You indicate that the S-meter connection on a TSW Teensy can go to pin A19. There is