开云体育

The Yun is pretty cool. In addition to the Arduino compatible ATMega-32U4, it has an Atheros AR9331 running linux. From https://store.arduino.cc/usa/arduino-yun ############## The Atheros processor

I understand tha YUN is now a retired board with atmega32 While get much improved ones , cheap enough, i feel we can try better ones, especially when we use for multipke project trials. Regards Sarma

Possible reasons for using a Yun: 1. You already own one. 2. You want to use it for several projects and you prefer to standardize. 3. You want to use its linux and python integrations. 4. You want to

Ramon-- Para responder a su pregunta, no hay ninguna razón por la cual un Yun no se puede usar en lugar de un Nano (con el pin habitual y los ajustes de configuración). Su proyecto usando el ESP32

I'm interested in running a python program I wrote not sure the practical ability of the linux side based on RAM for me it's interesting to integrate with the program I wrote Sent from my Verizon,

Why would anyone be interested in swapping anything for a yun? It's essentially an Uno/Nano but at 10x the price. For less than half that price, the Teensy 4 has 2MB of flash vs 32KB, 1MB of SRAM? vs

/g/BITX20/message/79769?p=,,,20,0,0,0::Created,,Esp32,20,2,0,73386847

If you look closely, you can notice where I cut back some of the heat sink's soft aluminum right over the toroid.? Easypeasy.

This could create some interesting integrations

Sounds like a bad solder joint, making an incomplete connection at times. I'd get it working on receive, then try pushing stuff around with a finger to see if I could get it to fail. Perhaps around

Update: There is voodoo in this uBitx. I did nothing more than start measuring the voltages at the output of the regulator, and the radio started working on a power supply on which it did not

Yes.

I thought my Baofeng mic was dead since I had no SSB output but CW was working ok.? ?Turns out I had to do the BFO calibration, then I retested and then had SSB output.? ?Give this a look-see if

Hi, yes I confirm/agree the effectiveness of the KD8CEC Memory Manager to select transmit offset according to sidetone frequency (drop me a message if you need more infos). And I also had exactly the

What mode, SSB or CW?? That makes a difference.? The advice I gave Andrea was for SSB.? I have not really used the CW mode for QSOs, so I do not have direct experience with the offsets of

One more bad mic - mine came out of the box non functioning!? Nice to start the project with a project isn't it!? I'd say they need to start shipping it with a mic that actually works... or no mic

All, Good Morning. Sorry for the placement in this topic, but, I have an uBITX v4, firmware v1.097, this with differences in transmission and reception frequencies, how do I fix this, can someone help

Yes, all of the calibrations are available in both the onboard software and the Memory Manager.? This does depend on which of the multiple Nextion screen files you have used for your upgrade.? In

The short answer is maybe, with an adapter.? The electret element in the typical earbud is specified for 1.5 volts of bias.? Most work with a range of bias (the ones supplied with the versions prior

Dear All, GOOD DAY. I also have the same problem.Can we use the *Mic available in the headsets of the mobile phones* in stead of the existing MIC in Baofeng Microphone (supplied uBITX V6) by by