开云体育

OK - I thought you were trying to hook the V6 display to your V5?? Sorry.

Reed, ?I’m still reading how to transfer data thru serial port from arduino. W2CTX , Nextion is a touch screen display used for KD8CEC firmware on ubitx.

I must have missed something? Where did the Nextion come from?

Reed, I loaded the nano raduino with ubitxv6_input_output_debug (28,980 bytes & ~74tabs) , the ili9341 is still showing white screen & no response when touched. Tuning knob will produce crackling

Hi Bill, Thanks, but not at the moment, I'm trying to lighten the load ! Best 73 John K5MO

dan tayloe's high performance cw transceiver? have not heard of it. Details? Jack, W8TEE

You are missing a lot of fun Farhan Regards

Dex, the good thing about analog is that you can always improvise. as long as transistors, capacitors, crystals and resistors are available, analog radios will continue to educate, edify and

I have the standard issue Baofng [crappy] mic. What is a better brand or make ? Les,? K2TGW

Hi Farhan from South-East a ways. Bill N2CQR (he of SolderSmoke) would be a good Elmer: Fully capable both Digital and Analog, enthusiastic Constructor and collaborator. My 2p-worth: Analog hardware

That would be classic. I already have the harmonic filter. hihi -- 73 Dave ADOB ( https://www.qrz.com/db/AD0B ) Raduino bracket and Ham_Made_Keys ( http://veloliner.com/ham/k0mbtkey.pdf )

Check the relays. If it’s in all bands then check the T/R relay, if it’s just some bands, check the filter relays. In either case bad relay contacts would account for both problems. Sent from an

Yes exactly I was talking about the background crackle! I solved!!! By chance I discovered that the problem was an external HD connected to the pc! They are the HDs that have no switch on and off, but

After a couple of years of excellent performance, my ubitx V3 (last V3 batch with TDA2822 on socket) suddenly showed reduced receiver sensitivity and no-RF out on transmit. I have done the following

John Do you have interest in a swap with an unbuilt V3 Kit with the enclose blue. I purchased the kit but with a stroke I am unable to Build, I I will pay shipping for mine to you. If needed I will

awesome. i heard doug demaw was a great 160m operator. he built many 160m qrp rigs. at times, i want to build a cw twin set (separate tx and rx) with the mandatory 10 watts output. all vfo, all cw. i

Hi Ashhar, I have used 160 twice on"work all states" type of nets,?this spring before they quit for the season. I got 11 contacts from as far away as about 1200 miles.? Running a multi wavelength

I built a unit (I think it's a V3) with the factory case. I think I neatly installed the AGC mod. I know it works on CW and I know it hears well. I ASSUME it works on SSB but I'm a CW op so I'm not

There is nothing wrong with old just because of age. It's only a number. Tell me about it! And that applies to the old-dog-new-tricks excuse some use for not trying the newer technology (e.g., SMD

Hi Wes, I watch the news only *once* per day and try to catch whatever is coming from Lansing (MI capital). If something happens right after I watch the news -shrug-. I use some social media