开云体育

At this point I would get another SD card.? It is the cheaper of the two devices to swap out. 73 Evan AC9TU

Yeah... You have a questionable card.

I re formatted yet another time and now it says "Baud 9600 SD Update..... SD Card INIT ERRER Pleas Check Your SD C ARD is FAT32?" verbatim.

Thanks I will check it out. Bill K9JUI

That is interesting on the kt100 ldg tuner. I was given a presumably working ldg yt100 and and can't get it to do a thing as far as semi auto tuning.Tried cw tx wit hthe fcn button held down. The red

I would try 2 things: 1 - On the PC with the SD card inserted: Go into disk manager and verify that there are no hidden partitions on the SD card (I had this problem, even after formatting, as the

Sorriso im italiano non parlo English

What are you getting on the nextion, as is? Is it booting?

Hi Bill, Best bets are www.hamskey.com ( http://www.hamskey.com )?or ubitx.net They both have tons of info and downloads.

As I said a royal pita. In all my stuff I only found 5 SD cards, 2 full size 1- GB , 2-128 GB wont read, 1-16 GB which I reformatted numerous times.

With just that last file, it should work. Might be a bad sd...but, your computer sees it. Odd

At first I only had the last file .

Is there a file (tft) for the Nestion 3.2? (NX4024032) I have a V5 board also what hex file for the firmware? Thanks Bill K9JUI

Can you send a screen shot of what you have on the sdcard? Here is mine...I have a handful of files on the sdcard, but the nextion will only read the top one cause it's .tft I changed the others to

fat32 on a 16 GB micro SD, I tried 8k 16k 32k segments. I have the enhanced 3.5. I tried both basic & enhanced files .tft . The device states "no found file". I ordered a new 16 GB micro SD getting it

Kelly A new rig can sound different. I doubt you did anything to calibration by accident. Learn how the menus work on your own for all but calibration. Do listen to different bands. Enjoy the rig a

I use my 817 with the uBitx. I press and hold the tune button until it goes into the tune mode and then I just say “oooooooooooooo” into the microphone and watch it tune up. If you’ve never

Well, I connected my windom antenna heard some 40 meter cw, but I also heard some things like birdies and so my first thought would be to check for cold solders, shorten up wire runs, and twist cables

I formatted mine fat32. Did u copy the tft or hmi? ?Is your nextion an enhanced version or basic? If basic, get gthe basic version of the tft.

Everything? passed the smoke test, display lights up... forgot to connect speakers... and no headphones handy.. lol now to get to the speaker... wait.. junk box time!Kelly K5AID?Sent from my