开云体育

Thank you for posting the file Laurence. I will make sure that I do not let it get away from me again. 73 John

Problem solved.? A friend loaned me an original display. I loaded the factory software into it and it worked just fine.? Thanks K0MBT for all your help.? Now I just wait on my QRPGuys antenna to

HEUREKA - It finally works!!! John, that was the solution - the 1k Resistor in the TX line of the loop controller circuit. I was a bit afraid of bridging it first , soI changed it to a much smaller

you were right on Ted. I searched for the V1.12 software and it took a little bit but found a Beta version. I uploaded and the radio is working for me now. I had thought that I had the latest CEC

Laurence I also grasp your observation that its mostly on one band. On 20m try touching L5 and other toroids to see if they are in the act. Then try another band. We should never assume we are

Bill Glad you are still building with the challenge. On QSX, I found the QCX to be quite dense. Labels too small out of necessity for space. No problem. I matched part locations from screen to board

It is but not as visible.? If the output filters are less than correct it gets worse.? ?Also if you pushing power the LPFs will show heating effects remember 10W max even then your pushing

From Google Translate Japanese: Re: Please Yes, it is. *お願いします, English here*

Thanks a lot Allison Just wondering why the same heating issue is not there on other bands. Regards Laurence

Its a shame to give up your built & fully tested board now? Why not buy a V5? Or maybe wait for the new V6? May the peace be with you. 73 M0OOZ

Hi William I'm glad to hear you're enjoying the Ultimate3S kit. QSX... huge project... I'm working on it every day and making steady progress. Thanks for waiting. The wait will be worth it. I'm

Both cases come from the same source, heating in the amplifier usually the pre-driver and driver stages but it can include the finals. Its not thermal stable and parts do heat up and their bias

I do not have pictures, however I have seen just the reverse:? When first keyed, the spurs appear, then fade as the transmitter remains on.? This is with or without an audio signal.? Suggesting

Thank-you Laurence! This was not for me, rather for mrjohnac that requested the "FW" for the version 5 uBitx.? I assumed that FW meant Firm Ware, and I added that it was not a straight download,

I had mentioned this issue I have on the V4 that looks like RF coupling or leakage when testing CW on 20m for FCC compliance. I don't see it with SSB but if you transmit for long enough spurs will

I had a issue like this and it was because I selected the wrong hex image for the wrong display.

If you clone that github repo, you can built it yourself. Move all the .ino files into a folder called ubitx_v5.1_code Open the main file using the arduino ide in that folder

Hello I have attached the firmware that should have come with the v5 board. Built from the guthub for you. Its a .hex file

You have I2C LCD Selected? Is that what you want? Mike, WA6ISP -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID "MotDog@..." Mike@...

Erik.? I changed the code per the manual.? here it is. //Depending on the type of LCD mounted on the uBITX, uncomment one of the options below. //You must select only one. //#define