If you clone that github repo, you can built it yourself.
Move all the .ino files into a folder called ubitx_v5.1_code
Open the main file using the arduino ide in that folder called
ubitx_v5.1_code.ino
Then build it and program your Nano
On Sun, Mar 10, 2019 at 1:38 PM Laurence Oberman via Groups.Io
<oberman.l@...> wrote:
Hello
I have attached the firmware that should have come with the v5 board.
Built from the guthub for you.
Its a .hex file
On Sun, Mar 10, 2019 at 1:23 PM Evan Hand <elhandjr@...> wrote:
The only one that I know of is the GitHub repository where Ashhar keeps the source files:
All of the .ino files are required in the same directory to use the Arduino IDE to compile and then download the program. I have not done this myself, so there may be some tricks that are required.
Note: the version 4 software will not work with the version 5 board. HF Signals still needs some more updates to their web page, as the software link still points to the version 4 GitHub repository. Would also be nice to have a .hex compiled version available for those who do not want to go through the difficulties of the IDE.
Hope this helps, though you may want to wait for others to chime in before moving forward.
73
Evan
AC9TU
