开云体育

According to this guy an S unit should be 6 DB. However, I would believe your attenuator pads over any absolute S meter readings. Because you are using a series of attenuators, if the receiver input

I use mine on CW only and have had a few QSOs with E Coast US, but not easy to make using QRP into my home 44' wire antenna. Have only knowingly had contact with 1 other uBITx:?EI8FH on 40m. 73 Chris

Thanks for the links, Joe.? Do you live in 4 land? Think it's in the levels I'm in.? The receiver has gotten out of whack with the BFO cal as a result of my fiddling.? I'll get that back on the

Thanks for the info Jack. That is helpful. I put a Serial.print(result) right ahead of the return(result) statement. One click of the encoder spits out 3 numbers on the serial port. Of those 3 numbers

Thanks for the report and reminds me to go plug my mic in today!? THIS is why I got my uBITX and your report reminds me of that.? Thanks again. Rob de AG5OV

On Sun, 26 Aug 2018 08:53:06 -0700 "Eddie Esserman" <ee@...> wrote: Hi Eddie, are you using the KD8CEC sketch? The default sketch dosn't have those advanced ADC settings. If you are

I've been doing a mix of CW and SSB since I got the AGC working and the side tone volume down to a usable level.? So far I'm mostly on 40 meters. Dan, W2DLC

Hello all, Recently completed my ubitx and I'm testing it out on 40m. CW seems to work** (I added in the extra resistors to use an iambic paddle). However, I wired the mic up with the electret and

I do, much more than SSB. Even the BITX40 does a nice job. 73, Don

Charged the 7AH gel cell at somewhere around 250mA for about 6 hours and bingo, I can keep 11.8 volts? at a measured (cheap SWR meter measurement!) "5 W" output.?? With a CW signal at 3.510? MHz

Ashhar, Did you see Howard Fidel's suggestion that the filters could be recalculated to account for the added capacitance of the relays? Original post and comments here #56495 (

*OHH!! I look here at this post and can see many answers !! First I must say THANK YOU THANK YOU THANK YOU @ all 3 People here who helps me so much!* Ah Ok thanks now i understand this.. Yes ok i know

Hmmm...built and modified the Bitx40, now awaiting the ubitx. I didn't see this thread before ordering, but it will be an interesting learning experience. I shall have to see what the harmonics and

Thanks, Joe, How do you (or I actually) get to the iambic a and b page?? That's where I think the block may be. Straight key is working, and so is the dot side of the keyer. No dashes, paddle and

I have been using my V3 uB on CW only and have it working very well. ?But, I have never even heard another one on CW, let alone worked one. ?Is anyone else CW active with theirs? 73, Tom ?W1EAT

And so many of them! Don’t like one? Adopt another!

How 'bout the guy in Japan who got DXCC using 500milliwatts! Jack, W8TEE

Hi, During a QSO with a Swedish ham (with both of us at our homes) he told me he had a QSO with a U.S. ham in Oklahoma from Sweden on SSB using 15 meters and 200 milliwatts! So much for large Varian

If you get a 57 with an IC-7851 it is the absolutely normality to receive a 55 report with the Ubitx from the same station. You get what you pay hihi...

Wow! Thanks for the report! Gordon