开云体育

Now the reception/audio is in and out too! Like a poor connection somewhere but I have searched for the last hour and can see no loose connections anywhere!

Just to throw another good scope in the mix is the Siglent 1202X-E for $380. 2 channels, 200MHz all the bells and whistles come unlocked, no hacking necessary. A great scope, I love it. Eevblog did a

Steve, I get your analogy if you only look at the surface which is the camel's appearance. On the other hand the camel is a marvelous animal that if you want to think in terms of designed by,

I have seen on youtube where some have flashed the software in some of the scopes and other devices to raise them up to higher levels. There may or may not be some small components in them that limit

You have to press the vfo choose the band eg 14mhz and then using the vfo again. I have the original firmware version 3 installed and once you get acquainted it is somehow fast albeit a bit erratic.

I agree, my case arrived in 3 and 1/2 weeks as per ordered. Nice enclosure too and with pots and etc that match the case....

I guess I don't understand because to receive 3 through 30 Mhz aside from an antenna you simply turn the knob on the VFO and with this radio if your in 'say' 7 Mhz and you want to listen to 3 Mhz then

Yes, it indicates the header "pair" ....just like on the Audio header pair .....not enough room. Be sure to instal the jumper if you are not using the RF Gain potentiometer. Nice job on the board

I just posted the following warning to the www.w0eb.com ( http://www.w0eb.com ) website and want to make sure everyone that has constructed or is constructing one of our BITeensio boards gets the

I got my Rigol on eBay, new just a few hours.? DS1054 for about $370.? Had to do the 100MHZ operation. They have newer ones now, better, but more $. I like it, but for the price I think the Hantek

The audio you recover from an AM station will be exactly what you get from an SSB station. It's just that the ham bands are crowded, so the typical SSB filter has about 2khz of bandwidth. Good enough

Summary:? All is well, unless you have a WX branded TDA2822. Here's an old post regarding the TDA2822, many other posts in that thread worth browsing: ? ??/g/BITX20/message/43342

If you don't get the case in time for his birthday the radio will work fine wired up without any enclosure.? -- www.bitxmap.com ( http://www.bitxmap.com )

We buy bourns from mouser. If there are better ones, or a more robust model, let us know. Bad quality encoders were the main reason for my original hack of using a pot for tuning. The software was so

Here's one of them, though I can't really recommend it. https://m.banggood.com/G600-Digital-1-600X-3-6MP-4-3inch-HD-LCD-Display-Microscope-Continuous-Magnifier-Upgrade-Version-p-1152799.html Roy

I would suggest you meet you local radio club or meet another ham - elmer that might help you. He/she will be amused by the Ubitx, am sure about that. Apply the 4eyes principle when you find something

I ordered mine and it took about six week to arrive. ?I received no prior notice from Sunil about the delivery, but did receive notice from DHL when it was shipped. ?The case is quite nice and well

It is possible to build a simple test jig for evaluating mechanical switch type rotary encoders. Use 1K resistors in series with LEDs to show contact closure for phase A, phase-B, and for the

I had the same issue. It turned out to be the nano was not reading the encoder when running ubit files, either factory or the CEC software. It would allow menu selection but not frequency change. The

How about a link for the $60 Chinese microscope? Thanks