开云体育

Where did you get that done? Looks fantastic.

Jerry, This a topic change??? I put the TX aside for a bit to deal with life, garden, and play with the receiver. Generally the TX power thing is a hard nut to crack with the physical constraints

I feel obliged when I see emails like this to chime in.? I apologize in advance if it annoys anyone. My uBITX is my first HF rig and is the reason I went ahead and completed my Extra.? I saw the

No, all settings will be reset to "factory" values after each version upgrade. Power on the radio while keeping the Function Button pressed. This will reset all settings to "factory" values. However I

Looking for a factory Raduino. Hoping someone has one they aren’t using. If not, can someone tell me how to get one from the factory? ?LCD is not necessary.? Thanks 72 and God bless.

Ralph, 91p and 82pf are standard values.? I went with 82 and checked afterward.? The filter in mine went from about 1750ish? and kind of tight at the 6db points to 2280hz which is to me ideal. The

Ladies and gentlemen, Mr. Koster has had a bit of bad luck with the mail delivery; I’m not sure if he used DHL or not. I don’t think we are likely to make this gentleman happy despite whatever

Larry, For those that don't want to spend $$ for a nice stereoscopic microscope (which I still suggest is worth it) try the SolderScope ( http://www.qsl.net/k9ac/solderScope ). For several years I

Its what I call moders delight as there are many possible changes to suit a builders wishes.? The fact that it is SMT is not a hindrance as in this day and age leaded parts are?much more costly and

Ray, You are not obliged to buy the BITX40 nor UBITX. According to the huge amout of emails You could and should have known about the deficiencies of both transceivers. So knowing its limitations, why

It's probably an unsigned Int with a maximum value of 65535. 73 Rob AG5OV - The Junkyard uBITX

Ray: I think you're wrong on several levels. First, the rig does work "right out of the box" without mods. Second, virtually all of the mods resulted from the desired to do "something better" than it

I am afraid that your first post is correct and you do need the skills of superman to do any mods to this piece of junk!!. If this is a modders delight rig then why was it built using SMT components?

hi mike - might seem simplistic, but i thought of impedance mismatch.? i had exact same trouble with my second ubitx......took audio transformer and placed that at the output and cleared up the

Well, I like to go both ways - vintage AND modern (heh). Vintage - you can't go wrong with a Simpson 260. Older models sell for pretty cheap - shopgoodwill.com, (fl)ebay, sometimes an antique stores.

It would be nice if the front pc board fit, When I tried to put my case together The front pc board does not clear the main board and the connectors for the mike and volume control interfere with the

My BitX40 has been finished and mods for Ver 1.27 were installed.?I wrote earlier that I had forgotten to install the 4.7K resistor when I connected the RXTX line.?(History: the basic BitX before

Agreed de Vu3pen

Allison : Therein lies the beauty of building/customizing your own radio .. you choose to make it work the way you want it to. If you don't plan to use it for CW, then there is no need to worry about

Good luck getting several thousand forum members to agree when it's appropriate to start a new thread. Perhaps if it's "your" thread and you feel invaded, then a polite suggestion might be