开云体育

Well, you are the only one that has ever reported this problem so I believe you have a bad Arduino NANO on your Raduino card, or your Nano's A2 input is shorted to ground. That's just about all that

Good to know, luckily I made one low pass filter for 160m so I could try it but I have not any power supply with the current meter beyond 2A. My 13.6vdc 25A has no meter at all.

Pretty much same here (ordered 26 April, shipped 4 May, got upgrade to DHL ship).? Good progress! :D -KI4QGJ

I saw about 12 watts but did not look at the current draw. It was an accident I ended up on 160. When I noticed it would hear, I switched to the dummy load to check for tx and sure enough it worked!

Thanks for the reply; checked for shorts, found none... does same with function button disconnected. Jim ei8ig

Sounds like your encoder/function button is shorted or you have a Raduino Digital Plug pin 6 (red wire) shorted to ground. Either that or a shorted A2 analog input on your NANO. W0EB

firmware : groups.io/g/BITX20/files/ubitx_V2_02.zip uBitx 20 goes to Alignment on startup with no button press can't reprogram arduino in Alignment mode thanks Jim ei8ig

OK! I hope to catch as many of you as I can on Sunday and Wednesday evening. Jay WS4JM

Looks like HFSignals is almost all caught up.? Ordered April 26, shipped May 4. Down to a one week lead! Mine also got upgraded to DHL for some reason.? I guess I better dust off the soldering iron

I wonder if "Educational Electronic Kit" might pass?

I'd be in for one at $20 if any are unspoken for.

I'd like 1 of each kit.? I have not seen ordering instructions yet but will happily pay when instructed as to how. Thanks very much.? Mark? KC4GIA? KC4GIA AT GMAIL.COM

Typo I meant how much power output do u see on 160m and how much current?

Dear OM, I am aligning my uBITX Master clock and BFO. Should I do this process for both VFO? VFO-A and VFO-B? Regards VU2JON *JOHN T.P.* Tharayil House Sree Ayyappa Road Kuriachira Thrissur-680

I am interested in the two pcbs but I am not clear on two items. First, is there a through hole version available? Second, what is the cost? Thanks

That box is too small for this supply.

Make it "official" and see what happens!? -- John - WA2FZW

Another option for shipping within the US is USPS priority mail flat rate boxes.? The smallest cheapest one is 8-5/8" x 5-3/8" x 1-5/8" and costs $7.20 in postage regardless of weight.? You can

Ian’s explanation for the 100K is that you could add more switches later (e.g. with 51K and 27K) - but the same should work in the other direction too.? -- Karl Heinz - K5KHK

shipping weight for the EDAC power supply is 2 lbs.? USPS ground is $10.13. So anyone that wants one, they are $20 each including shipping. I have to check how many spare units I have on hand, but it