开云体育

Ian thanks. Got audio in and out of the Pi. At the airport on my way on business trip but did manage to get it all working last night. Made a few contacts with FT8.? So the next thing ( and it will

Googling "USB mini right angle extension cable" returned many hits.? The ones I saw were not panel mount but hot glue makes everything panel mount.

I've got my encoder in about the same spot and the plug is right up against the back of it, but it fits. Dan, W2DLC

Bob using the uBITX? v

If only the small plug was right angle, it would be perfect for me. My encoder is about a inch away and the straight one would hit it. I have never found a right angle in that style of

have you done a new vfo for the ubitx ? i have your bitx 40 vfo andwanted to see if you updated ?

Raj's response seems to be more on target, post 46601 Also Dexter's post about filtering the 12v power supply line to the Raduino. This may be firmware issue but I doubt it. The original firmware

Sergio, You are hearing the LOOP refresh of the nano controlling the SI chip. What is strange is that you can hear it with the volume control disconnected. Try to add some capacitors to the audio

thank you if I find someone who helps me to load in arduino ... For the volume wires I already tried to change road and at the end I put a shielded cable but it does not change anything! If you

Sorry, thought that was direct to me Dave, You have to be signed in to this group and then you will be able to access the "Files" menu. Search on what you want and you should be able to find it

Buongiorno no! non c è nessun tv o cellulare vicino! ho provato ad alimentarlo con due alimentatori stabilizzati uno da 12V 2A e l' altro 12V 5A lineare e non cambia nulla! ? Poi mi sono

2 remaining -- David ?N8DAH Kit-Projects.com ( http://www.kit-projects.com )

Thanks guys, found it 73 Mike N2HTT

If you're talking about my website, it's w0eb.com but it isn't operational yet. Otherwise, you have to sign in to [email protected] and go to their "files" section and search for W0EB or W2CTX. Jim

What is the internet URL address for the BITX files downloads? Thanks, Dave KD1NA

Also, what Ron said about just wiring direct audio connections, then using CAT control to do the push to talk should also work. I sort of like having some transformers in between, and some

Sergio, I am reprinting Marco KG5RPT post here. ----------------begin quote ---------- This has to do with the SI5351 library.? Upgrade the software to Allard's version and the issue should go

Ciao a tutti, Buongiorno Sergio, vicino alla tua radio c'è qualche TV collegata, un caricabatterie per cellulare o una recinzione elettrica? Le tue fonti sono con o senza trasformatore? Questa

Well, I didn’t know there was a need for a tutorial! So let’s make one right here. The easydigi route is cheaper than the signal link however the same idea works. This is basic point to point

Thanks for the reply it's maybe the first thing I did! I tried to feed it with two different stabilized power supplies! 12V 2A and 12V 5A but does not change anything! Tested with antenna and without