if I find someone who helps me to load in arduino ...
For the volume wires I already tried to change road and at the end I put a shielded cable but it does not change anything! If you remove the three-pin socket of the volume potentiometer, you will still hear it! If I remove the bipolar socket that connects
to the Arduino, it will no longer be heard!
Sergio
Da:[email protected] <[email protected]> per conto di Rod Davis <km6sn@...> Inviato: martedì 17 aprile 2018 13:51 A:[email protected] Oggetto: Re: [BITX20] Help me! annoying ticking in the audio #bitx40help
?
Sergio,
I am reprinting Marco KG5RPT post here.
----------------begin quote ----------
This has to do with the SI5351 library.? Upgrade the software to Allard's version and the issue should go away.
A lot of work was put into the software to resolve this and many other issues.
github.com
This sketch is intended as universal, standard Raduino software that should always work, even on a unmodified out-of-the-box BITX40 + raduino board. Without any hardware modifications the sketch provides the standard basic LSB functionality. The sketch provides
additional features such as USB, CW ...
Hope this helps.
Marco - KG5PRT
----------------end quote ------------
Apparently Allard's software is crucial to curing this problem.
Here's how to do it:
go to
click on green tab "Clone or download"
click on "Download ZIP"
save the file,? and unzip it
(CAN SOMEONE PLEASE PROVIDE COMPILE/LOADING INSTRUCTIONS FOR SERGIO??)
---break---
If Allard's software does not cure it completely, you might try making
the volume control wires shorter, and routing the volume control wires
away from other wires.
I do not have a BITX40 - I have a uBITX, so I cannot go through all the steps
to test this out. However, the above process should cure the problem.
