开云体育

https://www.amazon.com/gp/product/B00SK8L0IU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Hi folks. rebuilt it and still the same voltages. No negative reading. As for winding polarity....pass! Tried looking for an explanation online , made as much sense to me as calculus does to a

Hello everyone, I am pleased to announce the arrival of my platinum uBitx, this day by the airmail indiapost. uBitx ordered 19 February, mail from PayPal 12 April, and delivery 16 April. Now I can

Hi Tom, Thanks (especially for the pictures)? I don't see an interface, are going directly from the mike/headphone jacks to the laptop audio jacks? Dale, W9ESE

Nobody? I have the ubitx in the drawer since february. I would like to have a way to contact Ashar or the website...

Hi, I am using a qrp labs vfo as vfo and bfo.It does not decode wspr.Is it because I am getting a sideband inversion by using vfo at 19mhz? I have tried setting vfo hi and low but still no

no there is no voltage regulator all power supplies are in parallel and powered by a stabilized power supply 12 v 5A grazie

good morning?Rod Davis? ? and thanks for the answers I attach the photo of the interior. For the volume potentiometer I tried with a shielded cable but nothing has changed! Power is supplied by a

I extended my BITX40 DDS using female to female jumpers. I later reduced the wire count using the schematic shows what's needed for the display connections hope this helps WA9DOH

You can use similar pugs and sockets and wire them yourself according to the length you require. Regards Lawrence

Gordon Use standard DuPont cables. They come in 10cm, 20cm and 30cm lengths x 40 wires joined together with rainbow (actually resistor colour code) wires. Mike ZL1AXG

I have a 2 meter setting to do the same

Funny you mention those boards… I have a couple of them sitting in the project queue here for the loaded uBITx. Have not tried them yet but most people say they work ok. Dr. William J. Schmidt

Hi Folks! Does anyone have some links to the display/ Raduino extension cable parts? I want to remote the display from the main board. 73, Gordon Beattie, W2TTT? 201.314.6964

Well the last picture in each row tells the story… that is the coil. It appears to have 0 Volts on receive and 11.38 Volts on transmit so the voltages are all ok. It then does appear you have a

Nice build. Pictures are great. Thanks for sharing.

Cross-fertilisation of ideas between hobbies... I'm assembling a uBITX, and I find that one item has a 5mm shaft rather than the usual 1/4 inch. This means that none of my spare knobs will fit.

Hi Justin: It didn't occur to me to use morse code for the feedback, and also, not everybody knows morse code.? That said, not everybody understands English either. :-) I agree that it would be easy

Hi all, Since time is short for me, I went ahead and ordered and just received a new board. This new one appears to work.?? So, for anyone who wants the original board with all hardware (received

It could be easily, and I'd welcome such a feedback mechanism. However, of course this wouldn't be useful to those who don't know morse. This would be a pretty inexpensive optionas well, and I'm