开云体育

Awesome!

Nice! what is the WX. Hip? secondly does all of our workbenchs look the same. ?Good thin the cases are flat in the back to push the last broker further back on the bench with all the

Does anyone have a file with the UBITX? EEPROM map as delivered from the factory? I had to replace the Nano board, but now don't have the proper EEPROM settings to get going again. Joe

Hello Mike, If you press and hold the encoder for about two seconds you access the "Tune Step" adjustment menu. Values range from 10Hz per step up to 200Hz per step which allows you to quickly tune

Nic job! You might consider posting that section of the code in the files section to that others don't have to reinvent the wheel. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ

Well done Vic, it looks really nice. My SWR bars looks too "fat" in comparison so I need to adjust the characters and the code. 73, John

...and it now looks like this:

The other thing I've found is it makes listening a lot more pleasant. I shift mine about +700 hz and it really cuts the background hiss and improves the audio, on SSB. Is there a way to store that in

Which version did you load?

Thanks, John! That last hint was the problem. I had been switching between printLine, where the line number being printed is needed, and print, which prints starting at the last cursor position, so

I installed Ian's excellent uBitx firmware last night, version 1.04. I haven't played with the memory manager yet but I will today. One feature that seems to be gone is what I call "ballistic"

Thanks for your information. 2018-03-24 13:56 GMT+08:00 Mike Woods <mhwoods@...>:

as many are enjoying TDA2822 failures, better to drop the supply to TDA device to say 8 or 9V while using 13.8 for balance circuitry. Regards MVS Sarma

On Tue, Mar 20, 2018 at 01:00 pm, Tim Gorman wrote: > > Walter, > > I have a 1 amp fast-blow fuse on the red lead going to the main circuit > board and a 2 amp fast-blow fuse on the brown lead

Patrick The contrast control (pot) is mounted on the Raduino facing towards the display. There is no brightness control (although you can add one)! Mike ZL1AXG

Would anyone tell me how to adjust the contrast, not only the brightness, of the LCD, so that I can read the characters without tilting the whole chases or adjust my watching angle. Thanks Patrick

The issue with not using the chokes is that now you are putting DC through the core in addition to the RF and adding to the saturation of the core from the DC component. That’s why you can get away

Mark Your rig is up too! 73 Mike ZL1AXG -- Mike Woods mhwoods@...

Mike These pics are now visible in the gallery M -- Mike Woods mhwoods@...

Bruce If you got an initial email from Paypal it "took".? They are currently shipping orders from around 24-28 January based on constructors declaring this on the BITX20 list here.?? You should