Re: Fldigi with UBITX
Apologize for not following the discussion.
rOn
To: [email protected]
Sent: Monday, March 5, 2018 2:07 PM
Subject: Re: [BITX20] Fldigi with UBITX
The topic was using his Rpi with FLdigi and
By
W2CTX
·
#43665
·
|
Re: Fldigi with UBITX
The topic was using his Rpi with FLdigi and other programs and he mentioned RMS express is not available on the RPi. Of course he can use a laptop/ PC for it all but if your Rpi is the computer wired
By
Joe Puma <kd2nfc@...>
·
#43664
·
|
3.5mm jack.. is it only me or?
#ubitx
#parts
After sorting my issues out I started building a case and run into the next problem.
Out of the 3 3.5mm jack I was able to only turn the nut on 1 of them. Barrel isn't very long. Am using double
By
John
·
#43663
·
|
Re: Fldigi with UBITX
Or you can run direwolf on your pc directly.? I use it all the time with packet.If RMS express can't handle it I would complain to the powers that be.
rOn
To: [email protected]
Sent: Monday, March
By
W2CTX
·
#43662
·
|
Re: Yaesu microphone connector
Not much reply. Would also like to know for a Baofeng mike that I want to use.
John
By
John
·
#43661
·
|
Re: Jerry Solved the puzzle!
O... THANK You!
I read the official Arduino site stuff but never saw it anywhere.? Every internet link said Analog ports
can be used just like digital.? I did learn the Numbering scheme, I never
By
Michael Hagen
·
#43660
·
|
Re: CAT Support uBITX Firmware CEC Version 1.04 Release
#ubitx
Thanks Ian, will try it out when I can.
Hope you get some assistance in writing/contributions to a user guide as per your request on your website.
By
Nigel G4ZAL <nigel@...>
·
#43659
·
|
Re: uBit Crazy Software Problem
On a Nano A6 and A7 are analog input only.
--
DuWayne? KV4QB
By
DuWayne Schmidlkofer
·
#43658
·
|
Re: Fldigi with UBITX
On the ATMega328P that's on the Nano, pins A6 and A7 are analog inputs only.
The other analog pins can be used as digital pins.
Takes a pretty thorough read of the datasheet to figure that out.
By
Jerry Gaffke
·
#43657
·
|
Re: Fldigi with UBITX
Walter have you tried dire wolf on the Rpi? You would still need to run RMS express on the laptop but you can connect to the RPI as a TNC modem using KISS. That’s how my winlink set up works at the
By
Joe Puma <kd2nfc@...>
·
#43656
·
|
Re: uBit Crazy Software Problem
Simple problem and I am stumped!
I wrote some test sketches to test the Analog Pins that are on the 8 Pin molex? called "Controls" on uBit.
Well on all 5 Nanos I have here, A6 and A7 don't want to
By
Michael Hagen
·
#43655
·
|
Re: Fldigi with UBITX
Fldigi runs on Rpi. Wsjtx also and host of other programs.
Joe
Kd2nfc
Sent from my Ham Radio
By
Joe Puma <kd2nfc@...>
·
#43654
·
|
Re: uBITX Sketch on an Arduino Uno R3?
#ubitx
Thanks for the pointer in the right direction! I'll give it a go :)
--
Ryan Flowers - W7RLF
MiscDotGeek.com ( http://miscdotgeek.com )
Multi Band BITX40 ( http://miscdotgeek.com/bitx40-digital-jt65/
By
Ryan Flowers
·
#43653
·
|
Re: USB port ubitx
Mini.? NOT the kind on your phone; one size up.
By
Arvo W0VRA
·
#43652
·
|
USB port ubitx
What kind of port in on the ubitx a micro usb or mini usb
--
73, W9KJO
Walter
By
Walter
·
#43651
·
|
Re: CAT Support uBITX Firmware CEC Version 1.04 Release
#ubitx
Thanks for the release Ian, good job.
Joel
N6ALT
By
Joel Caulkins/N6ALT
·
#43650
·
|
Re: TDA2822 ill treatment test! Photo of blown TDA
Wouldn't you have to insulate the jack frame from ground?
That would be a return path from either the tip or ring to ground through the headphone transducer.
By
Brian L. Davis <brianldavis@...>
·
#43649
·
|
Re: TDA2822 ill treatment test! Photo of blown TDA
Didn't have it on long enough to transmit. Turned on, saw the number on the DVM, turned off and said some unrepeatable things.
Vince.
--
Michigan VHF Corp. http://www.nobucks.net/ http
By
Vince Vielhaber <vev@...>
·
#43648
·
|
Re: TDA2822 ill treatment test! Photo of blown TDA
Good thing you didn't transmit, that would have given you something.
Something like smoke and flames where Q13 and R141 used to be on your Bitx40.
Just in case others decide to replicate your
By
Jerry Gaffke
·
#43647
·
|
Re: TDA2822 ill treatment test! Photo of blown TDA
You are correct, Clark.? This needs to be said loudly to any who might plug a TS connector into TRS jack, much like there are warnings about connecting power supply voltages backwards.
A little
By
Arvo W0VRA
·
#43646
·
|