The topic was using his Rpi with FLdigi and other programs and he mentioned RMS express is not available on the RPi. Of course he can use a laptop/ PC for it all but if your Rpi is the computer wired to your radio you can leave it that way, run direwolf on the Rpi and use whatever KISS or AGWE compatible program from any PC or laptop. Heck even remotely if you wish it.?
Joe
toggle quoted message
Show quoted text
On Mar 5, 2018, at 1:49 PM, Ronald Pfeiffer via Groups.Io <
w2ctx@...> wrote:
Or you can run direwolf on your pc directly.? I use it all the time with packet.
If RMS express can't handle it I would complain to the powers that be.
rOn
Walter have you tried dire wolf on the Rpi? You would still need to run RMS express on the laptop but you can connect to the RPI as a TNC modem using KISS. That’s how my winlink set up works at the moment
Joe
KD2NFC?
On Mar 5, 2018, at 8:59 AM, Walter <
W9KJO@...> wrote:
On Mon, Mar 5, 2018 at 04:57 am, Charles Ayers wrote:
What are you running FLDigi on?? A Win/PC, Linux/PC, or something like a Raspberry Pi?
Curious how many folks are running FLDigi on Ras-Pi because that's what I'm working to integrate into a field-portable station with my uBitX right now.
Thanks
Chuck (N1KGY)
I have a Pi3 that runs Fldigi with no problems.? However RMS Express will not run on a Pi.? So I abandoned the Pi3 for a laptop.? My laptop, running Win 7 will run indefinitely on my solar system with the no RMI problems charger I built for charging the laptop.? Since I have solar setup for both my QTH and my Mobile I have a reliable portable solution for both situations.
Plus I'm not real good at Linux programming and have been frustrated with three different books I purchased to learn the protocol.? It was hard just getting Flamp loaded and running due to my lack of knowledge in Raspbian or Linux.? So Windows is far easier to load up software and the frequent updates that come with Fldigi, Flmsg, and Flamp.
--
73, W9KJO
Walter
