Re: Help
Thanks I for the help I was about to go blind hunting for these parts on the board pictures worth a thousand words .? I am using a jack with a switch in it to kill speaker when using phones do i
By
Bill Walker <n9ri@...>
·
#34734
·
|
Re: BITX QSO Night, Sunday, November 19, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere
I was called by K6MM a contester, I used my qrp 5 watts to work him, report 4-3.? I cranked it up to 2KW to clear us a frequency on both 7.277 and 7.285 no qrp stations came back to me. Went back to
By
Ed Kelley
·
#34733
·
|
Re: BITX QSO Night, Sunday, November 19, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere
All I can hear is WA2VYA? STX in the SS on 7.285.5....grrrrrrrrr
By
Tom VE3THR
·
#34732
·
|
Re: BITX QSO Night, Sunday, November 19, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere
LISTENING and calling on 7.285 from the north
By
Tom VE3THR
·
#34731
·
|
Re: BITX QSO Night, Sunday, November 19, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere
Tried again on 7285. ?No luck.? KD9CYF
By
Doug W
·
#34730
·
|
Re: BITX QSO Night, Sunday, November 19, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere
I'm there! -- John - WA2FZW
By
John P <j.m.price@...>
·
#34729
·
|
Re: BITX QSO Night, Sunday, November 19, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere
Go to 7285, I will clear the frequency. W0OIC
By
ekelley
·
#34728
·
|
Re: BITX QSO Night, Sunday, November 19, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere
No luck here at 7PM or 8PM. Did work a few contesters in KS and SD lower on the band. -- John - WA2FZW
By
John P <j.m.price@...>
·
#34727
·
|
Re: BITX QSO Night, Sunday, November 19, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere
No luck here. ?Tried 7277 and 7285.
By
Doug W
·
#34726
·
|
Re: Recommend a 10-turn pot for allards raduino
#bitx40help
#parts
They are China copies, not Bourns. Who knows, I have some that seem to be OK? Mike, WA6ISP
By
Michael Hagen
·
#34725
·
|
Re: BITX QSO Night, Sunday, November 19, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere
Been calling for a few minutes on 7285 heard nothing
By
David Arthur
·
#34724
·
|
Re: BITX QSO Night, Sunday, November 19, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere
Someone is contesting on 7277.8 and someone is on 7282. I'm going to try 7285 -- John - WA2FZW
By
John P <j.m.price@...>
·
#34723
·
|
Re: Recommend a 10-turn pot for allards raduino
#bitx40help
#parts
All mine are the same as that one and they work fine I have 2 back up just in case chris
By
chris gress <Chrisg0wfh@...>
·
#34722
·
|
Re: Recommend a 10-turn pot for allards raduino
#bitx40help
#parts
This is a set of 5 potentiometers.? They are working well for members of our local BUGS group.? (BitX User Group and Society) :-D Keep a spare, share with friends! AMAZON.COM DAOKI 5PCS 3590S-2-103L
By
lostfrogsrecords <dave@...>
·
#34721
·
|
Re: Recommend a 10-turn pot for allards raduino
#bitx40help
#parts
This by a Known manufacturer, may be better than ones on eBay? Just a thought. This is a new item, I have not seen it before at BGMicro. Mike, WA6ISP
By
Michael Hagen
·
#34720
·
|
Re: Help
It should be https://github.com/amunters/bitx40/blob/master/CW-CARRIER%20wiring.png (note the capitals CW-CARRIER) Yes that's correct. For the complete instructions see
By
Allard PE1NWL
·
#34719
·
|
Re: Recommend a 10-turn pot for allards raduino
#bitx40help
#parts
Probably work fine, I have not tried one. I believe some have reported success with a 100k pot, though I would probably choose a 10k version, same as the pot from hfsigs. Plenty of 10k up on ebay too.
By
Jerry Gaffke
·
#34718
·
|
Recommend a 10-turn pot for allards raduino
#bitx40help
#parts
Is this pot sufficient?? https://m.ebay.com/itm/3590S-2-104L-100K-Ohm-Rotary-Wirewound-Precision-Potentiometer-Pot-10-Turn/253118031474?epid=2232798165&thm=1000 If not plz recommend one?
By
nphektor@...
·
#34717
·
|
Help
Trying to install a mods and can't find the following file. https://github.com/amunters/bitx40/blob/master/cw-carrier%20wiring.png I keep getting page not found. Also on the PTT SENSE WIRING? the
By
Bill Walker <n9ri@...>
·
#34716
·
|
Re: Reminder - Maker¡¯s Net on Echolink
Reminder - Maker¡¯s Net on Echolink A new net devoted to Makers (DIYers, homebuilders) has started up on Echolink conference node 9229 (*TECHLINK*). All those interested in building their own
By
K5ESS
·
#34715
·
|