开云体育

check the condition of the Fun switch. Check the switch is actually "normally open" re check for resistance in the open state. Or replace the switch. Re-seat the LCD Check where the connection is

Right on, mon! 73 ...

... and being 50 ohms they match the amps'? z i/o. No toroids there! :) 73 ... Thanks for the link, Jerry.

FB. Ancel. You got the real things right. Good projects page, john AD5YE

Thanks for the Ubitx link, I'll certainly give it a shot and publish the build on my hackaday blog. I've got all the RF instrumentation to tweak it into submission. Maybe even do a? higher wattage PA

A quick 'one-liner' back-and-forth will most likely show within a screen of some previous. I consider it more efficient than 10 MB/GB of previous history - and more effective too, with the time taken

No, Dexter got it right this time. He let me know that I forgot to include some current text, not previous. Jerry

That's funny, Dex! Jerry doesn't include previous text in his post and you're lost. Yet you do it all the time to us. Vince. -- Michigan VHF Corp. http://www.nobucks.net/ http://www.CDupe.com/

For anyone else that is seeing this problem, I tried isolating power and ground connections to the Raduino and shortening the leads from the main board. I finally decided to try another LCD display.

Thanks for the heads-up, Dexter. Was a bit too fast hitting send on that one. This uBitx webpage: ??http://www.phonestack.com/farhan/ubitx/ubitx.html (

Sorry, Jerry, but I'm just lurking here on Groups.io. "This webpage"? Link please?

Put the spaces[] array definition outside of any function, near the top of the file with the other data definitions, somewhere around line 230. Jack, W8TEE To: [email protected] Sent: Wednesday,

I figured that if there were 10000 steps over 5v, and I had a 20mv drop at the wiper, that would equate to 40 steps, so I figured 50 was a good starting point

I'm looking at the uBitx schematic at the bottom of this webpage. If there's something more recent, I haven't heard about it. Jerry

Hi Allard It's at 9950 right now, hopefully I'll get a chance to play around some more later today. I have insalled the fine tune button, and it is a huge help!

which circuit are you looking at? - f jgaffke@...> wrote:

Jack, well poop, that'd didn't compile. Scary thing is I think i understand what you did! I put the #define statements up with the rest of them. tried the code in setup, then in the loop I get this

Greg, The one in the QEX article is obsolete. I have found, and bought, a number of modules on Ebay. Most recently I picked up 3 equipment pulls from the same guy for $6.00 apiece. Any module the puts

Those output low-pass transmit filters are 50 ohms and symetrical. You could just borrow a filter design from some other rig that's suitable for 50 Watts of power. Should be one filter per ham band as

Source code (complete project) for the sample code I posted yesterday may be found here: https://github.com/pilant/N1VQW-HomeSprinkler It is functional and works (I have already built two