开云体育

Jack, not really a programmer.. started to compile got through the MorseCode.h issue, it balks complaining? Arduino: 1.6.9 (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega

That worked! Email is a bit odd here. It comes in on the? mac in my office, and the windows machine is in the basement. They are not linked. So, got the file from the mac, put it on a flash drive,

Really? To: [email protected] Sent: Friday, August 18, 2017 4:50 PM Subject: Re: [BITX20] A little ardunio help Breathe Jack, breathe... Vince.

Breathe Jack, breathe... Vince.

GEES...I JUST SENT YOU THE DAMN MORSECODE.H FILE. THERE ARE TWO, 2, DUO, DOS, SOURCE CODE FILES. LOOK AT THE BOTTOM OF THE EMAIL I SENT TO YOU JUST BEFORE 4PM. MORSECODE.H IS ATTACHED AT THE BOTTOM OF

p.s. most of the development of this was done in the thread of post#30470, and seemed fixated on tying either pin 7 or pin 8 to 0V or +12. I put my rationale for taking pin 3 to 0V in there - why on

For what it's worth..I have down loaded my DDS pictures with the Nano removed. I installed headers so I can Plug n' Play nano's as improvements come in. Just remember the USB connection on the NANO

Obviously it's not there because you didn't down load it! ?I just sent you the missing file...are you reading the emails I sent? The last one has the missing file attached. Don't download it into

Okay... this is seriously getting under my skin. Downloaded the Macintosh version of the Arundino IDE Downloaded all the needed files Down loaded B40SoftwareR310106.ino Tried to compile No

Humm... no bet on the donut. I know it's not there. This is simple and it's driving me nuts. Where in God's name does Ardunio hide the sketches? The B40 I downloaded has nothing but the sketch...not

It is possible that the mistake only zapped the program inside the Nano without destroying the Nano. I would first try programming the Nano using the instructions found here: ?

I sent this out a few days ago, and multiple times before that: ========================================================== - - Jack Purdum?<econjack@...> ? -

Do you need a word per line to explain things? On a less sarcastic note, do you have the ability to print out a picture? If so, there's a perfectly clear one in post#31512 from my compatriot Ted. It's

There are two orange wires in the supplied wiring harnesses that connect to the Raduino. One of the orange wires goes to pin 15 of the connector labeled "OSCILLATORS" in the schematic, this wire

Well, I'll bet that's why the compiler can't find it. Did you download it when you downloaded Rel106? You can download it from the users group File thread, or just use the one I've attached

You can always give full path to the files in the #include line. This makes the code custom and a bit less portable but experienced coders can probably handle that. _._

Hummmm.... well couldn't find the file MorseCode.h so I had the computer look for it. MorseCode.h is not on my computer. NO place! Mike, WB8VGE

Okay a quick peek inside the B40SoftwareRe10106 folder shows nothing but that file. Nothing else. Mike

Jack and the group, I'll dig through and let everyone know. I find that the Ardinuo IDE really likes to hide files. mike, wb8vge What *exactly* is in the directory

What exactly is in the directory named: A:\Users\User\Downloads\B40SoftwareRel0106 Jack, W8TEE To: [email protected] Sent: Friday, August 18, 2017 1:25 PM Subject: [BITX20] A little ardunio