开云体育

That's what I did I don't have pay pal it worked OK for me

I notice that on http://www.hfsigs.com/buy_paypal.html ( http://www.hfsigs.com/buy_paypal.html ) it says: "We accept payments through paypal as a safe payment system for you. *If you don't have a

I just checked the google site with all the schematics. It has images of both (all!) AD9850/51 type circuits. One can easily get the layout from there. john AD5YE

I'd agree. I've been working 'from the junkbox'. I junked a small PC power supply, and from that recovered a couple of 10uF/50V electro caps, plus resistors;10 ohm and 27 ohm (see footnote). I put the

There is a google site which has nothing but lots of AD9xxx circuit images. It has an impossible address, but you can find it through google. This is a very good source, but is all

Thanks Rich, but credits should really go to Jerry Gaffke, KE7ER, who developed the minimalist standalone "si5351bx" routines! 73 Allard PE1NWL

How do you know how much 1st class postage is to Australia? If you do know that, this would probably work. Jack, W8TEE To: [email protected] Sent: Wednesday, July 19, 2017 2:39 PM Subject: Re:

library at all Allard, this is HUGE! THANK YOU THANK YOU for all your hard work! 73 - Rich WB2GXM

Thanks, I found that EIM company but not as much as you got. The only thing they leave off is relative spacing from mounting holes to the pins. I will start with this info. I can guess a little and

how about this? https://reipooom.files.wordpress.com/2013/08/eim377_ad9850_signal_generator_module_v01.pdf ( https://reipooom.files.wordpress.com/2013/08/eim377_ad9850_signal_generator_module_v01.pdf

I take the thin cardboard boxes from the PO, the little ones for priority. They a not full thickness. I have been cutting a square out, 2" masking tape them in the slot. 2 sheets of paper around

Dozens of links, I can't find pin layout or schematic. Every sells them no one seems to care about the data. Anyway I found 5 on eBay shipped for $55, good price for US seller! You can't buy the

Yea I will look into it trying to keep it as low as I can to pass them on to people. Worst case its 2.67 and I know it will get there.

I google but found them for sale no schematics. I use different search company? I will look again. I bought them over 2 hours ago, can't believe the problem. I got them on eBay good price US

Get the thin cardboard CD mailers. They should ships at 2oz letter rate. DuWayne

I do know that I can send 4 of my TFT/vfo boards domestically for $2.67. Beyond that, I don't know. Jack, W8TEE To: [email protected] Sent: Wednesday, July 19, 2017 2:17 PM Subject: Re: [BITX20]

Jack, How much does your board weigh? Does anyone know how much a double sided 1/16" PCB weighs per Sq Inch? I need to know! I ggoogled for a while and gave up. There were calculators but

A google search on AD9850 module will give you the schematic and pinout. The pins are 2.54mm (.1") spacing on 20 mm centers. If you use Eagle cad there is a AD9850 module library available.

How did that little board cost 2.67 to ship?? The way you packaged it? you shoulda been able to send it for one Forever stamp. Wrong. That's the lowest rate you can get for a parcel. Anything that

hmmmm I will have to go to the office and talk with them a bit more, I too felt the 2.67 was a bit much. ________________________________ Sent: Wednesday, July 19, 2017 1:26 PM To: