开云体育

Hi. I am using a Icom HM-36 microphone, as ?had one in the shack and I find the size and shape comfortable to use, the audio also sounds good on another receiver. Phil - G7BZD

Hi everyone I have just completed upgrading my Bitx-40 with the Raduino digital tuner. Thanks for the help I received doing so. At this stage I still have the original electret microphone

Starting on the East coast that would be 01:00 z Monday cruisenewsnet@...> wrote:

Hi Randy, My serial number is #458. I ordered it back on 10-31-16 and I received it on 11-18-16. Built it out in April 2017. I bought the Raduino part in March. Currently running v1.09 (great

Unfortunately you seem to need a Facebook account to view this information.

Thanks indeed! This might need clarification: ? Here's my guess at how it works: ? Flipping between LSB and USB modes during receive may help avoid hearing a nearby interfering station. ?If the

Thank you Allard! I'm inspired by (and trying to keep up with) your work... 73 de AC2PL Jeffrey Bonanno, Ph.D., AC2PL jeffbonanno@... --------------------------------------------

Going over 12v can overheat Q13 and/or R141: ? ??/g/BITX20/message/21904 ( /g/BITX20/message/21904? ) ? ??/g/BITX20/message/19792 (

I've just released raduino v1.10, download it from https://github.com/amunters/bitx40 ( https://github.com/amunters/bitx40 ) Some minimal hardware (a few resistors and one PNP transistor) is required

Hi all, I added RF gain to my Bitx40 because strong signals were causing audio distortion. I followed this ND6T lead -

If you use the LC VFO you should have at least 10V at PWR port. When using the Raduino as VFO you probably can drop another volt, to 9V, before the sensitivity of the receiver starts dropping. Under

All: Some text editors add special control characters into a text file and the compiler will choke on those. Some editors (e.g., Word and some PDF editors) use special "double quote" marks that are

Joe, That did it – thanks art Sent: Friday, May 12, 2017 3:12 PM To: [email protected] Subject: Re: [BITX20] BITX40 on Digital Modes Art, Those (pretty common) errors usually occur when

I paid the extra $10, had it in less than a week and no other charges. Fast shipping great packaging. Now to find time to finish the kit. KA4NRF Steve

Art, Those (pretty common) errors usually occur when a sketch is copied / paste not in the raw form. They can invisible characters that the IDE does not recognize. The offending character is shown

Joe, Downloaded all. Am trying to compile with IDE 1.8.1 and getting an error Stray ‘\302’ in program Any help? Thanks art Sent: Friday, May 12, 2017 11:28 AM To:

Thanks Pat. Thats the kind of instructions an infantryman can understand?-john

Yes. ? As per this post: ?/g/BITX20/message/24710

In the Arduino IDE, go to FILE>Preferences and click on "Show Verbose Output" for both [ ]compilation and [ ]upload. This will then cause output of error messages which can be copied and included in

Sorry my error - meant to say i was using v108 and switched to the latest v 1.09 Joe