开云体育

it costs less than 7$. perhaps I get links on aliexpress as if sending to India. all said item # can't change , i suppose.

the item is described as " "Top Selling 50mm x10M Adhesive Single Face Electric Conduction Copper Foil Tape EMI Shielding Guitar Slug and Snail Barrier"

Home Depot and others have copper flashing tape as well. 73 Larry KB3CUF

Bill, www.aliexpress,com enter item # 32693821837 you get access to it. wrote:

Copper Foil Tapes | | | Copper Foil Tapes Copper Foil Tapes | | | To: [email protected] Sent: Wednesday, February 22, 2017 7:55 AM Subject: Re: [BITX20] Enclosure for BITX40 That page can't be found on

All: While software is "my thing", I would really prefer to keep it tied into this group. A spin off might see a big-frog-little-pond effect for us, I think it's important for us software nerds to

That page can't be found on Aliexpress, Sarma. Can you give us anymore information to steer us towards that particular tape, please? Bill VK7MX

Thanks, Andy for the message reference and the help. I just sorted it out from post by Randy K7AGE, However, I am very grateful to get your additional comments to help with my learning curve...steep

Ashhar Farhan wrote: Hi Ashhar, I for one would like to keep the Bitx-40 software discussions on this list, there is always the delete key for those who are not inclined to dabble with the messages

Thanks for the explanation and help, Randy. That was it, WOW...do I have a lot to learn. I did do a search of previous posts for the answer but was unsuccessful (it helps if you use the right search

I only wish I could build the nice displays many of you did.

I stumbled upon these projects. Great for tuning up BITXs power or antenna matching. The first one is simple and the second one is high quality. http://www.users.on.net/~endsodds/twotones.htm 73 --

Comrades! Do you think we should move the software related issues to another list? Just asking, I am not advocating it. The nature of open software code discussions is such that it will give jeepers

/g/BITX20/message/20449 ( /g/BITX20/message/20449 ) ( /g/BITX20/message/20449 ) ?Thankfully, it's pretty easy to update the code for V2. Here's the

I will be sure to check out the analyzer when it comes out. By the time you guys get this bit of code organized where I can just copy and paste it in, I should be done putting mine in an enclosure. A

Well, conventionally PSK31 uses upper-sideband. If you've got an SI5351-based BitX, it's a fairly simple matter to change sidebands. I've forgotten what sideband is typically used for RTTY. This

Well, that's what I was afraid of. It is like trying to make milk from chalk and water, you're going to need a lot more than what you got. In other words, it's impractical.? I would need proper

If you inject a 700Hz carrier into the mixer, you will produce two mixes + and - of the carrier. The xtal filter removes one and what is left is a pure carrier. not MCW as I know it. If the carrier

Jerry, That was me on R104. No idea on 100 ohms emitter of Q13. I propose to parallel on Q13. I tried to blow the transistor Q13 with my main rig on 40M but BITX on a wire.. did not blow. The double

John: I have an article coming out in QST on an Arduino antenna analyzer. The bad news is that I don't know when it will be printed; only that it will be "by Feb next year". That said, it's built on