Do you think we should move the software related issues to another list? Just asking, I am not advocating it. The nature of open software code discussions is such that it will give jeepers to the 'rest of us'. Those on the linux kernel list will vouch for this. the discussions are often wild and engaged and some times scarily technical.?
On Wed, Feb 22, 2017 at 12:49 PM, John Smith via Groups.Io <johnlinux77@...> wrote:
I will be sure to check out the analyzer when it comes out. By the time you guys get this bit of code organized where I can just copy and paste it in, I should be done putting mine in an enclosure. A basic black spray painted rectangle holiday tin. I used a nibbler for the LCD cutout and it looks a thousand times better than some others jagged Dremel cut outs.
I once killed a Uno by plugging in the USB cable while it was still plugged in to 12V. I knew better, but just didn't notice it first. I will be thinking about that when I upload the new sketch. And I do have a spare Nano.
Side note: Make it easy on yourself and change the pots for the knobs you have. On mine I thought I would be slick and use a 100K ?for nicer tuning. But nope, the higher resistance pot had a high resistance response on the incoming signal. No radio signals, just random birdies. Swapping it out to a smaller size diameter 10K pot put it back like it was with the original part.
