开云体育

I too have ADE-1-24 mixers, I am yet to complete my bitX20. has anyone got their BItX rig working using these ADE-1-24 mixers? I have a stock of 2nd hand SBL-1 mixers that I might change to in my BitX

i also have some ADE-1-24. same thing happen, seller on ebay states that its ADE-1, so is the photo. instead, i receive ADE-1-24. friend of mine says that ADE-1-24 works fine in bits-20 pcb but havent

This is the answer I received fro Mini-circuits . So the part was developed as a "special series " for a customer and therefore can't hold the specifications . That's crystal clear . The vendor is

perhaps every Chinese trial need not be fake.

That's possibily the only and right conclusion . Like I sais , I'll use LREM-1 because I have found a supplier in The Netherlands .

Probably manufacturing rejects that were scrapped..

Yes , no problem . It's look like an ADE-1 , the same construction . I found the chenise compagny ( original ) . My idea , it's a fake from chenise manufacturers .I will send them back ( return to

Marco, Can you see the inside through the potting compound underneath? Like in the sellers picture. Raj

Hi Ray , The English e-bay shop will take them back without asking questions ( ????? ) So something must be wrong with the devises .The only thing they told me was : " leading manufacturer of SDR all

Here it is http://www.aliexpress.com/item/MINI-RF-Mixer-Frequency-Mixers-ADE-1-24/337818603.html I would break open one and see whats in it!! Cheers Raj, vu2zap

This ADE-1-24 is on e-bay but labelet as ADE-1.The vendor ( England ) use the data sheet from Mini-circuits as info .

The close-up will show what looks like a genuine ADE-1 except it is labeled ADE-1-24. The "protected by US patent" claim refers to the casing, not the electronics content. I think I would stay away

---In BITX20@..., <jm.feuggelen@...> wrote : Can you post a close-up photo of the device? 73, Todd ------------------------------------------------------------------------------------ ?

According to the Mini Circuits web site, there is no "ADE-1-24". I found a datasheet for a Panasonic 24V latching relay and a reference to a Chinese manufacturer. The Chinese unit is claimed to be a

Hi , Do anyone know if there is any technical difference between ADE-1 and ADE-1-24 . I have a lot of ADE-1-24 but they don't behave like " normal " mixers . Marco

SolderSmoke #179 is available: http://soldersmoke.blogspot.com/2015/08/soldersmoke-podcast-179-special-tenth.html ?YESTERDAY MARKED 10 YEARS OF THE SOLDERSMOKE PODCAST-- A clip: The first minutes of

congrats Mike 73s and best of time pass using bitx20 v3b

Hi Mike Very pleased to hear you have solved the problem, we all make mistakes and actually it's the best way to learn.? The Bitx is a great little rig and I'm sure it will give you many hours of

Hi Jim thanks for answering I have checked the coil again and found much to my disgust it must of been wrong as I removed it and replaced it with a single coil to prove the point and it worked so I

well said Jim. It is very probable error for most of us. -proper phasing of windings of the trifilar transformers.