开云体育

Ryan and Ken, PC board layout and STL files have always been the design pieces that have remained the property of HFSignals. However, there are always exceptions. For example, the original design

You want a "bare unpopulated" PCB? I'm sure you could convince Farhan to share the PCB design once it's finalized... I thought you wanted a PCB with the components installed... Ken, N2VIP

Good on you for taking this on! ?I know many others will appreciate it also. ?We all just deal with it. ?I have a drok, twisted pair and a ferrite on the display power and a flat ferrite made for

OK!!? ?I have preliminary results to report. First, the day started off badly.? ?While working to get going for morning CW practice listening to high speed ops on 80 meters, I got the amplifier

I intend to repackage one of them. ?I have plenty of pi’s here and don’t need another one? even if I only save a few bucks. Shipping a bare unpopulated board in an envelope would be reasonable

I'm not sure what a board only kit would look like, omitting the display and RPi 2 Zero W might cut the cost $30, and the case maybe another few dollars, but you're still looking at expensive shipping

You can find the circuit diagram on github in the sbitx/src/docs folder. Here is the circuit diagram link ( https://raw.githubusercontent.com/drexjj/sbitx/refs/heads/main/src/docs/sbitxv2_circuit.pdf

Gord: I for one appreciate you frank observations. bringing to light the almost ancient Analog transceiver is a god analogy. I could go further back to my Johnson Valiant with the HQ-170 Hammerlund

W9BLW, thanks for sharing your experience. I implemented this idea that I shared in message #114315 ( /g/BITX20/message/114315 ) regarding a program error. The idea came from this

When I ground it, nothing happens.... maybe there's an error on the circuit board. I'll check the resistors. It's a brand new V3 board, btw... so not homebrew.

wanted to add some comments as i trouble shoot this same issue before i was a part of this IO group. I had this exact issue and it was VERY bad, huge birdies on the waterfall and very high level of

Hi Group, I want to add an ADC chip to measure incoming voltage, could easily do this over I2C or SPI. Is there a document showing what pins on the RPI are being used and for what? We should even

Just a quick note. ?If you haven’t already try switching to the latest 64bit img of sbitx available on jj’s git hub. ?It has wsjtx “improved” installed with an alternative ui for smaller

I got myself on the list for the zbitx the day they came out. ?I also own a modified sbitx v3. ?At some point will the zbitx board be available on its own in either populated or unpopulated

I run SDC on Windows and as much as it is really impressive, I wouldn't be tempted in the slightest to try and get it running on the sBitx. If you haven't already I'd take a look at Fldigi, it can

Februrary is fine. I can live with it till then. Hooking up a large monitor defeats the purpose of having a portable HF rig with a Pi in it. Thank you HF Signal folks.

Ashhar, that’s a lovely problem!! and a reflection of your commitment degree!! happy new year!!

Happy New Year to everyone [email protected]> wrote:

We have closed the zBitx orders. Frankly, we weren't prepared for the love we got for this little radio. Personally. I was expecting to do a run of 100 for those who have been asking for it (self

Thanks! I may be able to try it also. Gordon KX4Z [email protected]> wrote: