开云体育

Just thought this link would be of interest to the group for those who want to play up on the higher frequencies. https://www.w1ghz.org/xvtr/transverter.htm (All links download a pdf file to read at

Pierre I am also an HL2 user. Fldigi is included in sBITX releases. The screen is a standard LINUX screen for the OS flavor used, just small. You can add apps, although you may have to compile them

Stylus Pen for Touch Screen I took Mark KI4HQK's advice ( /g/BITX20/message/112180 ) and got the recommended pen. It works really well for capacitive touch screen i.e. sBitx

Pierre, of course, you can install the apps you want to use on the RPi. What's happening? you will see it in the menue and you can start it from there, unless you put it on the desktop, so that you

Currently user of a Hermes Lite 2, my favourite mode is JS8 with JS8Call and JS8Assistant softwares, which allow me to chat easily with low power on long distance (15,000km on 40M and 10M), JS8 being

J12 and J13 are an option for additional control, if someone knows how to handle programming and hardware. -- Gyula HA3HZ

I am curious why on the sbitx board there are J 12 and J13?

With apologies to Sandy Denny and Judy Collins I installed the gnome system monitor on my sBITX and collected some CPU usage in different use cases. The sBITX is a V2 with some V3 mods. The processor

Edit /home/pi/.profile Go to the end and delete the last few lines that export the time zone as Arizona. Reboot and it should be fixed. Garrett N7QWT

My experience with VHF crystal filter is that termination impedance is critical.? Try 50 ohms. L1 and L2? with C1/c17 are are L-networks for impedance translation, experiment here as well. The

Thank You everyone for all your help. I feel much better at running my v3 at my power supplies 13.8v now. Thanks again 73, Robert

I did a quick simulation in Keysight's ADS using your crystal parameters from above. I looked at the schematic on Ashrar's video and I think I got the capacitor values correct, but I couldn't read the

I have prototype boards in the mail as we speak. If they work well, then they should be available to buy in a couple weeks. As designed, it uses an RCA jack and can be fitted to the radio by drilling

Sorry, sent to early... I meant to say that I use a wireless keyboard and mouse. That allows you to navigate the screen as it's to large for the display and let's you scroll around to see

I have been using JJs toolbox to change the resolution and a wireless keyboard. That way I can use jtdx and get it to send it pota without cutting off my callsign. If you are running the stock

If you have a physical keyboard you can hold down the alt / option key and drag the window around.

I'm glad that someone else finally recognizes the little things I've been talking about for about half a year. -- Gyula HA3HZ

You can use the forum by selecting 'Topics' instead of 'Messages', then you can more easily read that what you just asked has already been said a few messages earlier. So you should have just read the

Sorry to disappoint you Ray, there is another built in Mic that would transmit what you said to XYL! Raj