开云体育

b option. We already do this, I'm just working on cleaning up the code and may be make it useful to others. This is the backend API and UI we use in our

Installed and build on a v2 sbitx. Sometimes the rx does not start. Also sound quits randomly. When this happens the speaker icom shows like is muted. When is receiving correctly, everything works

Evan, for the pitch control controls the audio tone of the cw sent and also received (the bandwidth control centers the cw bandwidth around it). To control the sidetone, you have to use the SIDETONE

Ashhar, Playing with the controls on my sbitx DE, I did not hear any change of the sidetone with the pitch control on CW. SSB receive is working GREAT!? Good clean signals, and all controls are

I'm still curious but I'm not sure I understand, do you want to: * use sbitx's user interface code to control a different radio * use a different UI to control sbitx's radio * both (a) and (b)

It is supposed to save the log entry. You should have the call, sent and recv fields filled for it to work. - f

Suggest you read the article I wrote on page 13, and pay attention to the high output microphone element that I

When I click LOG>> on the native interface, it does nothing. -- Gyula HA3HZ

Gyula, Try the native UI, the web is kludgy. I will fix those things in a few days.

I'm trying something like this: Inexpensive Homemade Electret PTT Microphone ( https://qrpguys.com/wp-content/uploads/2021/11/electret_assy_102921.pdf ) But I'm putting it inside the case of a cheap

Hi Ashhar, There is no problem there, the issue for me is that the code still mixes the ham radio features and modes with the core radio I/O. Nevertheless, your code is top-notch, another class of

Rafael, that is already in place. The low level controls are all through a single call : sdr_request. The commands can also be issued over tcp/ip under Hamlib's NET rigctl. See hamlib.c - f

Thanks for your insights, Dave. I agree SDRAngel build and dependencies are not trivial, but this is easily solvable, and also agree Ashhar software is great and by no means I want to replace Ashhar

With the v3 software alpha did you notice any relay noise with break-in keying the sbitxDE? -- Mike - kb2ml

I agree in principle with the above.? The problem is when, how, and error or selection reporting.? If, for some reason, the SWR sensor fails in either the V2 or modified DE, the current program will

Evan, There are three groups of controls. On the native GUI, the ones clustered around the frequency display are to do with the basic radio. AUDIO, IF, etc. The ones on the top left are mode and

Sorry for the delayed, long response.? Ham radio SDR has been a big hobby of mine for the last several years so I have a lot of thoughts I want to share.? Also this is the second post of the

I did not mention that the relays clatter when first started.? They settle down quickly. 73 Evan AC9TU

I just finished updating my sbitx DE to the V3 code.? It works as well as the prior code.? I still have an issue with an interruption occasionally with the sound card, and it is not always

Peter, Do you have the SWR/Power sensor installed? Also, did you copy over the hw_settings.ini file from the prior install? I have a bench supply that limits the current and is adjustable.? I also