开云体育

You are right.? You can only direct enter the frequency to the nearest Khz.? Beyond that you have to tune with the encoder knob. The keypad frequency entry is in the enterFreq function in

I also had SSB/CW QSOs with the uBITX 3 and am waiting for some parts to finish my uSDX. Fun to work with QRP although I also have a G2DAF exciter and G2DAF linear, both home brewed built a long time

https://www.youtube.com/watch?v=oXQde18P3Lo Awesome 24000km record QRP QSO to VK4KA

ok a discovery...... Probably not using the correct words but: If I turn the tuning knob from indent to indent it goes up by .1 but if i leave it between indents (ie between clicks into position) then

Hi Rolan Thank you for the reply. I thought it was incrementing in .05 increments originally but it is clearly going up by .10 increments now. I dont see anywhere to change this in settings. Can you

If you are interested in alternative firmware for the stock v6.1,? I have created my own version on github.? You can check out the features here to see if it is of interest to you:

I don't know why but I ordered another V6 board - I now have four, this is a sickness... :-\? HF signals must finally have all of the kinks worked out as I cabled it up and immediately had a working

Well, I "paid my dues" in the homebrew department over 50 years ago.? A world war 2 ARC-5 TVI generator for the PA tube & socket, an old TV set for its power transformer, plate loading coil wound on

yes .. rs918 is mchf clone but it was our group that included freedv in mchf and it WAS ME WHO HAD THE IDEA!! dg9bfc sigi Am 28.03.2023 um 00:49 schrieb Gerald Sherman:

I thought that I could do everything myself when we were working with vacuum tubes, and when transistors came along early on it seemed like you could still do things yourself, but now with integrated

It should tune in 0.05 (50 Hz) increments.? ?I'm running my modified code on my v6.1, but I didn't change the increment in the stock software, and mine does 0.05 increments.? ?If you want to

Sigi, What a fun way to do it. It is so much more enlightening when you have a bunch of friends to do it with. I wish we could dumb down an ssb radio to the point that people with soldering skills

The RS918 is the Chinese copy of M0NKA's McHF. Gerry Sherman Sent by the Linux Thunderbird

I have two uBITX v6's and one uBITX v4. My digital crosspatch works great when plugged into the microphone input on either one of the v6's but I get less than ONE watt out of the v4 using the same

nope .. its the second first is/was mchf (and now its cloned from china) i brought david and our programming group together ... rest is history :-)

ah ... a clone of our mchf (M0NKA was built in our local club from a dozen users) it was me who brought david and our programming group together i have seen that the mchf and the stm1000 share the

I checked, the power is set in WSJTX and JTDX to maximum.

Hi I am thrilled with how well the ubitx v6.1 works but I have a question regarding tuning steps. I can use fast tuning steps and i can use slow tuning steps but if i type in 3846 for 80 meters and

Check power control option built with wsjtx or Jtdx. It should be maximum to obtain max power.

When transmitting SSB, the radio works with power up to 10W without any problems. However, when working with the FT8 emission, the power drops to 1W and I am unable to increase it in any way. The