开云体育

Ashhar, Where might the blog page be if it is not right here, I would like to be on that page if possible? Sorry for being slow in understanding whats going on here. Thanks for the help Alan w7aln

While on the subject of Where the 3d files are for printing the Torids. What is the dimensions of the torids (od, id, and thickness Please?) I dont have a 3d printer so I am attempting to turn a few

John ,more than likely yes.mosfets can be matched exactly just like any semiconductor? but if you purchase? a pair and they are not specifically"matched per order,"then you might as well buy a bag

I've made some progress. I took out the LM338 and put in a LM2596 based switcher. I bought some PA MOSFETS (IRFZ24N) off Amazon but I'm not sure of their quality or whether they're mislabeled.

I am converting my V6 to a 2.8 Enhanced NX3224K028_011 display. The first 28 tft I found gave me the "file number too low" error. Where should I look for the current file for this display? John

160m is totally doable. You “should” use a 160m low pass filter after the uBITX and before the antenna. ?Why? There are no internal uBITX 160m filters. My “friend” ran it w/o a 160m filter

Squeeging? That is a term I am not familiar with. Unstable, no. Noise there without the crystal. B Sent from Mail for Windows Sent: Saturday, August 27, 2022 11:39 AM To: [email protected] Subject: Re:

Do you have a scope? The bfo might be squeeging

I noticed that the BFO in the daylight build is rather noisy and microphonic. I changed a few parts and the orientation but that has not helped. I have the BFO/MIXER and the audio section together.

You can easily change the pi user password. From the desktop open a terminal window. Either pressing the terminal icon or use this key combination: <alt><ctrl>t In the terminal window you type :?

I actually switch to straight key and back currently in that respect a tune button is just more convenient. I searched whether I could could have set that up via programming a macro - a bit like a

I have fwded it in a separate email in this group, yesterday. wrote:

Dear Ashhar Farhan, Could? you please sent me the new 3D printed PTO files?? Or tell me where I can find them. Thank you. 73 Dave WA5DJJ SUPER QRSS/WSPR GRABBER https://www.qsl.net/wa5djj/

Thanks Ashhar.? I pulled C18 and C19 and the unit will boot, pulling about 1.2a.? It gets to the pi desktop and seems to crash, screen is still backlit, but no desktop.? Draw goes to about .6a Josh

Good idea! Should it be a separate mode or should be have a TUNE button? wrote:

You forgot a step between 1 and 2, lower the RF power level.So three steps to tune and three more steps to put things back. This is why there needs to be a TUNE button. Not only does it speed things

Rolf, The another way is to: 1. Type \cwinput key (choose the straight key). 2. Press the PTT for a continuous wave output. Remember to put the cwinput back to your original setting!

Please send me a rubber thing that goes into an LED holder for a power on LED in a WA2EBY linear amplifier. One of the leads goes through one hole, but I can not get the other wire to go through the

Hi, a tune button would be a nice addendum in a setup where there is an automatic antennatuner. Twotone confuses my tuner from a well known company. What a great little rig the sBitx ? Vy 73 de

There could be an HERMESLite2-based protocol implementation daemon which talks to the sBitx control + data planes, or a gnuradio sink and source which could be connected to ip-based communication