开云体育

Thanks to Don, KM4UDX for, very eloquently, stating the opinion many of us have about the uBITX Community. Better "customer service" than I have ever received from an original equipment manufacturer.

Hi all, I've bought a V5 board some months ago, I assembled it in a custom case with a good battery pack, connectors, etc etc. I've well set up the frequency calibration (see there :

Hi Farhan, I was just reading the post you did elsewhere and was impressed at the work you did to accomplish the user interface with such minimal resources. For the uBitx that is fantastic as it

Evan, Mark, Raj, Anthony, & Co. What is marveling about this lovely radio is its resilienance to stupidity. What is marveling about this community is how unbelievably kind, helpful, generous and

Tom, I have moved on to using nothing except the standard arduino libraries. The current build is dependent only in the i2c and spi libraries. I am going bare metal on the touch library as well. I

Don, The initial post states that you were able to follow the bias adjustment procedure correct?? And that you were able to adjust the bias resistors to get 100 ma increase for each IRF510.? That

Oh wow…thanks Farhan! That’s pretty useful information to have. I think that putting keypad control together will be useful still, especially for direct frequency entry, but glad to hear that all

Hmm, A counterfeit could be 0V at its "gate" though. Did you ever track down the source of the new finals? 73 Mark

Perhaps the biggest problem with STM32F103 Blue Pill development on the Arduino platform is there are two competing tool chains, the original "Paul Stoffregen" toolchain and the "official" STM32 tool

I stripped all the paint from the connections to the chassis, and twisted the wires up a bit more. There is continuity between the coax ground and the other grounds. Any other ideas why its picking up

Cory, jack, Great ideas. I am travelling and I will try implementing these. One of my key constraints is to keep things working with what others find easy to use. I would switch from Arduino to the

Is there a manual, or pictures, or help to set up the new uBitx Ver 6? If so, where can I find it? thanks,? Paul K0ZYV

Buddy, All the user interface is usable without needing touch. If you tap on the tuning knob for a second, you can move the focus from one button to the next and then click in the button to select

Ooh…a thing that reads the screen in morse? That’s half the battle toward eyes-free operation. The other half, of course, is some additional way to control besides the built-in touch screen

Solved by inserting the small PTT switch into the orange Raduino line. Now I can switch to Tx by PTT via CAT with or without plug in the mic jack. And can activate Tx via the little PTT switch

Just had the same since yesterday. I installed the small PTT push button in the orange cable coming from Raduino board and going to the microphone key jack. Now th problem is over. You can now do a

You are very gracious. I think the real issue is that my other rigs know if you are in CW mode or in single side band mode, and so they can’t offset the beat frequency oscillator appropriately The

Good Afternoon, I don't know if this has already been discussed.? I found one message with same issues but no answers.? Could someone point me in the right direction? When I plug 3.5mm cable into

And sorry to double reply, “good ide support” I mean something other than Arduino IDE. ?VSCode or JetBrains CLion. ?Both have much better syntax highlighting, auto-completion, git integration

Rick, We have one on order for testing and fitting of the AGC just to be sure it fits and works as it should. We will keep the group updated with our findings. 73 -- David N8DAH Kit-Projects.com (