开云体育

Or…. Some clever experimenter will upgrade their v5 to a v6 and document how they did it for the group/ post the instructions. Either or…. Either or… Sent: Friday, December 13, 2019 10:29 AM To:

I messed up ordering and wound up with two of these, one from HFSignals and one from Gigaparts. I kept the second around just in case I messed something up during the assembly and needed a spare. I've

ah...this is great! thank you and I'm on it. Well, given that I've never actually measured voltage on any transistor I'm not totally sure what I'm on. haha.

Very good marketing move. Sir. There are many hams that don't know how to handle an iron.? One doesn't have to look past this list and see many radios that don't work because of poor assembly

Oops, Probably should have linked this one instead: /g/BITX20/message/46629 Plug the Mic plug into the female jack and use your DMM to check for continuity of the various pins - Mic

The circuit is exactly the same on the main board. We had to bring some od the ptt and cw keyer lines onto the main board to connect to the front panel. That apart, we uses same data lines of arduino

Jim, Check out this old post /g/BITX20/message/46637 Pretty much sums it all up. 73 - Tom N8TPN

Hi! Nice work! Do you have a list of changes between the v5 and v6 radio board? -adrian

OK, found it. The basic kit version is up there in the header. Works now. W0EB

^? Yes, if the firmware will work in a V5 and give a CW reader, that would be pretty neat even if just during demonstrations or show & tell.

I thought similar, if following the dedicated V6 page..... then found the hyperlinks From the hfsignals home page http://www.hfsignals.com/ there are the two pricing options shown each taking you to

Looks good to me. Ordered mine today. Santa will be good to me this year. -- 73 clyde kk4ywi

Can't buy the basic kit for $150 US though, only the $199 "Full Kit" version available for sale on HF signals.? Either fix this or lose a lot of sales. W0EB

I am trying to calibrate a V5 box using a frequency meter. I need someone to interpret the instructions for that in the user manual for CEC software. I tried just transmit and adjust and not the ing

Is it possible to upgrade a V5 to the v6?? If so, what would be required?Sent via the Samsung Galaxy S8+, an AT&T 5G Evolution capable smartphone

Ashhar, will the v5 board no longer be available?

Hi...I've got a BITX40 project nearly complete, but I am having difficulty figuring out how to wire the microphone output to a female stereo jack. There are three lugs for two wires coming from the

Worked for with DHL Ordered full kit though

I have added a morse reader already. I shall finish integration to the user interface soon. Ill check the dhl option tonight. Do pass on any typos and mistakes. I pulled an all nighter and wrapped it

See here /g/BITX20/files/VU2ZAP/uBitx4%20voltages.xlsx Raj