开云体育

Hello, Any news in the new version of antuino? I have all parts and want for the improvements! Regards Rick LU9DA

Thanks Vic. I did more or less the same (I didn't have a preset, so I soldered a 47 Ohm resistor) and it fixed the distortion as well. Ramakrishnan

Did both and problem solved. Had a couple 10k left over from another project and used one. The original pot looks good on a meter but didn't play nice. 1k resistor on center of control as well. Works

Some of these outfits are fast shipping. I ordered some of the relays from Arrow yesterday with free shipping and they showed up this morning via FedX Priority! ... and the prices were cheapest of the

Did you try adjusting contrast pot for LCD.? Also make sure the 5 Volts is at 5 V, should be within +- about .05V.? If still a problem, take the Raduino out and connect it to the USB on your

James, Thanks. I really just need to try to learn.? After having tried to work with stepper motors and multiple PID sketches unsuccessfully, Arduino programming has left a bad taste in my mouth. I

Call sign at Yahoo is best. Tnx, Ted?k3rta

Ted - It should be very easy to do. I don't have a Nextion screen with me, but I can help you with modifications. Will message offline. Ramakrishnan VU3RDD -- Ramakrishnan

No, the end purpose may be a curiosity though it ins't a primary question so far as programming is concerned. Maybe I want faceplate work lights to go on and then off, maybe I want to switch antennas;

Aha!? There is an adjustment pot ... Lots to learn here, thanks for the tip.

OOPS, Forgot to mention that the reduced kit price for US mailings is now $8 which includes shipping. Jim - W0EB

After careful review of all the costs, we reduced the bare board and kit prices a bit. Bare board is now $3 mailed in the US and $5 international - this hits our intended "break-even" point plus a

This is very easy to do. The question is what do you want to do when the pin is pulled low? Jack, W8TEE

Ramakrishnan, If you're good with code, I wonder if you might be able to write a subroutine that allows an op to actuate a button press on a Nextion screen which latches a digital output to an "on"

I made a small modification to Farhan's original ubitxv4 code to add a CW learning mode where one can practice CW with the sidetone and not transmit it. If anyone wants it, it is here:

Thanks Mark. I made the modification suggested by Raj (cutting the trace across D15/D15 and added a fixed 47 ohm resistor since I didn't have a preset). Audio is much better now. 73 Ramakrishnan

Shouldn't need any hardware to implement this feature. Just create a screen button that sets and resets the same variable that is toggled by the ptt or cw key io pin. James

Have you tried to adjust the pot on the back of the display? bill k9jui

Hi everyone.? Just got my first uBitx, v5, and wired it up.? On power up the display lights up but sits on the "black boxes" for every character.? I can see the opening text (uBitx 7.150 etc) when

ja vendido. nx4j@... Atenciosamente / Best Regards, *Rubens Kamimura | UHE Três Irm?os - Manuten??o EletroEletr?nica* Fone: *18 3746-8680*. ramal 116, Móvel: +55 18 9 9819 2255