开云体育

Also with the 817 it works [image: Capture_wsjtx-817.PNG]

Mike, Glad to hear the preamp is working well with the uBITX ... I originally designed it for the Icom radios but was thinking there might be other radios out there that are setup for Electret mics

I recently obtained a new? W10 laptop and didn't install any drivers, maybe they were installed when I installed Arduino IDE. Have no problem whatsoever to connect to my uBitX v3. Attached device

Also, an update to my initial post, the tone I experienced when keying cw was a result of poor construction practice. I had the resistor connected directly to the tip connection along with the blue

Jim, I have attached an image of the wiring of my microphone for reference. I had ordered extra jacks due to a much earlier construction mistake, so I had some extra to do this with. I wired the

Hello all I have been working on a few projects and one of them is ready CW Zero Beat ( https://youtu.be/tSUGd2Igfic ) I don't know if anyone would be interested in a CW Zero Beat but I have 9 in kit

I put my bitx40 in a metal "collectors" Star Wars tin I had kicking around (I say "collectors" because they're not really collectible -- they sold millions of 'em, and my friend had a pallet's worth

Thank you for your help guys,Brian

Looks really sharp. Thanks for posting.? Can you provide a source for the?flight case that you used?? Thanks & 73 Dan

Imho, many hams have ceased to operate the ubitx until they make the mods to be fully compliant. Others just like to test the board to learn and experiment. Last weekend many active ops were busy for

Yes Vic and I had a nice qso. I listened on and off after that but quit when I was getting an AM carrier.? Vic said that he used his bitx40 as a mobile rig at times. I found that very interesting.

Thanks Tom. I recently printed one of the paddle keys from Thingiverse and one of the uBitx mikes. One thing I did that was useful was print a fly fishing reel and I have installed a 66’ long wire

That is a very nice design. The outer case looks like the case I bought at Harbor Freight. I was thinking about mounting the uBITX and a Raspberry Pi in it, also. I just bought a 3D printer, I may go

On a windows 10 machine using a v3 ubitx. I'm trying to use CAT control for my ubitx?with wsjt-x.? I select FT-817 as rig type, set baud to 38400 and COM3 (after loading CH340 driver).? I see: tx >

I’m not sure if you guys found the correct support for 3.2 or 3.5 or larger but I found the right files by searching. I can try to find the link if you’re having difficulty looking, but the right

Check out this link: https://ubitx.net/2018/07/16/nextion-3-2-and-3-5-display-firmware/ Not sure if this is the file that uses the full screen, or just recompiled with the higher resolution set

Very nice! Even room for a Coke and a sandwich! Jack, W8TEE

Please excuse my ignorance but i am a complete newbie ,is the software available for use with the Nexion 3.5 inch screen as i can seem to find it for other screen sizes but not this one.The screen i

Yes, listened at 3PM EST (2000 GMT) and heard K0MBT calling CQ. We had nice chat, BitX40 to uBitX, about 843 miles. Times for the weekly 7277 Sunday meet are 3PM and 7PM local time, although that

My newly created uBitx Go-Box - 3D printed and inserted into flight case. If you want more information and pictures head over to https://www.thingiverse.com/thing:3239609 Working to install a