开云体育

any word on when 1.09 is going to be ready to download??

Jack, sorry I'm slow getting back to you on the video microscope. My bottom line opinion is that you save the $60 and put it towards something better. I bought one of these from Banggood back when it

I'm having audio feedback during transmit through my external speaker.!? I have the issue even with a dummy load.? I hear my voice (distorted) on the receive side when transmitting on any band.

Not the cheapest but it got here in three days!! https://www.ebay.com/itm/262641839765

Mark, I went through the same agony in making a decision, and have been VERY happy with mine. The Ammeter is wonderfully accurate too. The harbor freight meters are?junk sorry guys. I don't trust

Gary The battery is for the Real Time Clock - not required at this stage. Yes E version of TFT file is for the enhanced version. The functionality initially will be identical for both standard and

Just noticed I forgot a picture.

Roy WA0YMH Yes. It works fine with just a couple inches of twisted hookup wire between toroid and LED. Adjust the number of turns for slightly less than full brightness at full power. FT37-43

I have made some photos of how I did it. You need to keep rather to the left (near K1) as on the right there are some lines on the bottom of the PCB. Also i had to solder the socket on the AGC PCB

Hi, Gary. Can you share the link for the item you purchased? Thanks!

Ian (and the group)?In great anticipation of running the Nextion display on my uBitx, I purchased a 2.8”display on ebay and it arrived today.?I ordered the “Enhanced” version and I found a

Jerry Beauty of the little toroid and LED trick is its simplicity and ease of use. https://www.youtube.com/watch?v=NjHyXi1SrZs https://www.youtube.com/watch?v=ltZLxdEteBY Of course if we were to

Yes, the firmware I have in use is UBITX_CEC_V1.080_16P.hex - the standard display. I did activate the S-Meter in the Memory Manager (I am using uBITX_MM_V1.081 here). I have attached my

Arv, so you have used this method in a QRP transceiver? Did you run the wire to the LED as a simple twisted pair or a piece of mini coax? Roy WA0YMH

QRM was pretty bad here in Orlando. I never did have any replies or hear anyone. So worked on getting digital working. Did hear a WSPR above my noise level on 30 so all wasn't dead

very good explanations Jerry. an another realisation http://f4gcw.over-blog.com/article-rosmetre-a-tores-ferrite-de-1-5-a-170-mhz-87487485.html Gilles F1BFU / FR 2018-06-18 21:22 GMT+02:00 Jerry

Very nice,I much prefer the modular designs for anything.I am thinking tho, when I take on an endeavor such as this, I would prefer to stack the boards in the box veetical? on their sides.Could still

Looks like a good choice. Though?is now going obsolete (at least for ON Semi), which is true of just about every audio amp that's ever existed except for the LM386. Somehow, the LM386 just keeps

Phase is important, if you are measuring current and voltage at the antenna port you will also want to measure the phase angle between the two. A Tandem Match more or less measures voltage and

Most TFT color displays will run more current. Out 5" display runs as high as 0.7A. Jack, W8TEE