Re: has anyone tried this super cheap Mega 2560 PRO MINI
I don't see where you can connect a cable to update the programs/sketches.
|
Re: has anyone tried this super cheap Mega 2560 PRO MINI
They don't have the built on USB connector. You need a separate board for
the USB. I have some NANOs that are like that. They work fine but are a
pain in the backside if you have to program it often and don't leave the
usb board always attached.
Vince.
toggle quoted message
Show quoted text
Has anyone tried these??? Aside from needed a TTL converter they look like
a bargain at less than $9 USD.?? What am I missing?
(
)
(
)
--
Michigan VHF Corp.
|
Re: Drilling template for 2 to 3 inch speaker
The one's I've seen use 4 bolts at the corners of a square-cut grill placed on the underside of the cabinet.
Jack, W8TEE
From: McCoy Phillips N5YAV <dmccoyphillips@...>
To: [email protected]
Sent: Friday, June 16, 2017 10:16 AM
Subject: Re: [BITX20] Drilling template for 2 to 3 inch speaker
Wondering how you secure the grill
McCoy N5YAV
|
Re: has anyone tried this super cheap Mega 2560 PRO MINI
I'd be interested in how they work for you, if you do buy one. They are not the "standard" MEGA 2560 Pro Mini footprint that I'm using on my VFO board, so I can't use them or I'd try it myself.
Jack, W8TEE
From: Doug W <dougwilner@...>
To: [email protected]
Sent: Friday, June 16, 2017 10:14 AM
Subject: [BITX20] has anyone tried this super cheap Mega 2560 PRO MINI
Has anyone tried these?? Aside from needed a TTL converter they look like a bargain at less than $9 USD.? What am I missing?
|
Re: Drilling template for 2 to 3 inch speaker
Wondering how you secure the grill
McCoy N5YAV
On Jun 16, 2017 07:14, "John P" < j.m.price@...> wrote: Drilling all those holes is a lot of work. Get one just a little out of place and it will stand out like a sore thumb. I've always found it easier to simply make a big round hole of the appropriate size using a punch or metal nibbler and putting a grill over it. Lets more sound out of the box that way also.
--
John - WA2FZW
|
has anyone tried this super cheap Mega 2560 PRO MINI
Has anyone tried these?? Aside from needed a TTL converter they look like a bargain at less than $9 USD.? What am I missing?
|
Re: W8TEE TFT/VFO DDS adapter
Thanks! Just sent a payment for two boards. Shipping address should be in the note I sent with the payment.
Rich KC8MWG
On Thursday, June 15, 2017 11:40 PM, Doug W <dougwilner@...> wrote:
Mike,
I would like one of your boards but this site chopped the domain off your email address.? Is it google or yahoo or something else?
thanks
|
Re: WANTED VK3YE LED LDR AGC diagram
Huw,? I had LED on all the time, till I realised the transistors were in the wrong way round,? I did not get a good response from mine with the audio input in, on the other end of the 3.3k so swapped it, may try a preset there later.
Hidehiko.
If you track down Peter VK3YE videos it will help with the S meter, the Pot is one leg to +12v and the wiper onto the + side of the S meter, - side of the meter goes onto the - side of the LED, in other words the meter and its potentiometer is across the LED.
Hope that helps.
Phil - G7BZD
On Fri, Jun 16, 2017 at 1:23 PM, <qrper72@...> wrote: Dear Phi, thanks for sharing your AGC.
I copied the same circuit now but I don't understand the connection of the S-Meter.
I added the S-Meter as your diagram but did not work. Would you please let me know the detail of the S-Meter connection.
ja9mat Hidehiko.
|
Re: WANTED VK3YE LED LDR AGC diagram
Dear Phi, thanks for sharing your AGC.
I copied the same circuit now but I don't understand the connection of the S-Meter.
I added the S-Meter as your diagram but did not work. Would you please let me know the detail of the S-Meter connection.
ja9mat Hidehiko.
|
Re: Raduino v1.15 released
Thanks Allard for your update!
It works well here in my situation.
The RIT function is very convenient.
I hope to add the S-Meter on the LCD someday. hi
Thanks again, 73 Hidehiko ja9mat.
|
Re: Drilling template for 2 to 3 inch speaker
Drilling all those holes is a lot of work. Get one just a little out of place and it will stand out like a sore thumb. I've always found it easier to simply make a big round hole of the appropriate size using a punch or metal nibbler and putting a grill over it. Lets more sound out of the box that way also.
--
John - WA2FZW
|
DHL charged me 38€ as a custom fee?
|
Re: CW Offset does NOT work on Raduino_v1.14.1 for BITX40
I use Ver. 1.09 and have no problem to sense TX via 10 K and A0.
Before I connect ?A0 to the main board the input whas very sensitive and get high if I hold my hand over the input.
Ingvar / SM6ERS
|
Re: W8TEE TFT/VFO DDS adapter
Mike,
I would like one of your boards but this site chopped the domain off your email address.? Is it google or yahoo or something else?
thanks
|
Thanks Jack. I found the same one earlier this afternoon. It is being restocked and available soon. Their statement from the web site. Whatever time that is. Want two asap. The price is surely good. I may order a third one larger to make changes and play. These two are for grandchildren to start having fun. I hope. Will order a third Bitx.?
Again. Information greatly appreciated.?
On Thursday, June 15, 2017, 22:13, Jack Purdum via Groups.Io <econjack@...> wrote: I think this is the same case that I ordered and it does have the folding handle:
Jack, W8TEE
From: R S via Groups.Io <rons8@...> To: [email protected] Sent: Thursday, June 15, 2017 3:27 PM Subject: Re: [BITX20] New Order
Very nice looking rig. What are its dimensions? ?Does the tilting bar allow swinging back underneath to back over the top for use as a carrying handle too? ?Thx for your prompt reply.?
KJ4FFG Ron On Thursday, June 15, 2017, 02:44, EA3IAV <Cesarleon@...> wrote: I have this one. Enough room and the nice tilting bar feature. You will have to drill holes for the speaker. You may use different panels as the fron and rear are detachable. They are only with a sliding panel.
I suggest you shield it with this tape or something like that?
|
I think this is the same case that I ordered and it does have the folding handle:
Jack, W8TEE
From: R S via Groups.Io <rons8@...>
To: [email protected]
Sent: Thursday, June 15, 2017 3:27 PM
Subject: Re: [BITX20] New Order
Very nice looking rig. What are its dimensions? ?Does the tilting bar allow swinging back underneath to back over the top for use as a carrying handle too? ?Thx for your prompt reply.?
KJ4FFG Ron On Thursday, June 15, 2017, 02:44, EA3IAV <Cesarleon@...> wrote: I have this one. Enough room and the nice tilting bar feature. You will have to drill holes for the speaker. You may use different panels as the fron and rear are detachable. They are only with a sliding panel.
I suggest you shield it with this tape or something like that?
|
That was my Ph.D. dissertation. If she would read it, that would make two people!
Jack, W8TEE
From: M Garza <mgarza896@...>
To: [email protected]
Sent: Thursday, June 15, 2017 3:34 PM
Subject: Re: [BITX20] uk customs
Jack, What's the title?? My wife would love to read that.
Marco - KG5PRT?
|
Hi James:
I still enjoy economics a lot and try to stay somewhat current in the field, but the software field changes so quickly, it's hard to keep up. Sounds like your daughter has an interesting field of work.
Jack, W8TEE
From: "jmlynesjr@..." <jmlynesjr@...>
To: [email protected]
Sent: Thursday, June 15, 2017 9:54 PM
Subject: Re: [BITX20] uk customs
Jack:
Sounds like the stuff my daughter(also Econ PhD) would write! Couldn't talk her into IE even though she took all the math and more.
Actually, currently modeling US transportation fuel policy.
James
|
W8TEE TFT/VFO DDS adapter
All:
I just noticed that I sent out a code version that did have the IF offset in the code. I'm in the middle of our hamfest and won't be able to get to it until after the hamfest is over (this weekend), but will post that code hopefully on Monday. Probably most of you will have it changed yourself by then.
Jack, W8TEE
From: Doug W <dougwilner@...>
To: [email protected]
Sent: Thursday, June 15, 2017 7:02 PM
Subject: Re: [BITX20] W8TEE TFT/VFO DDS adapter
|
Re: W8TEE TFT/VFO DDS adapter
Just sent paypal for a board please
Thank you!!!
?
73
? David
?N8DAH
|
Kevin Gilot NZ1I
Hidehiko Komachi - JA9MAT
N8DAH