开云体育

Give me two days and I will provide an update [email protected]> wrote:

I've tried all the suggestions and setting from various emails on how to get wsjtx to transmit on my zbitx. None of them work for me. Receive works just fine but when I do the "check cat" button

Wsjt x now working on zbitx Settings Zbitx in digital mode Data to rear jack Need to turn down tx drive as it pushes it to max output 5watts Joe [email protected]> wrote:

Joel, you are correct, for which I apologize. I read about what I misremembered here: sBitx WSJT-X cat control problem ( /g/BITX20/topic/100923793#msg104827 ) The letters of the name

Gyula, The only CAT problem I've ever had is with my neighbors cat demanding pets from me:), other than that I have never posted anything about CAT control, I don't use it., you must have me confused

Which heat sinks are those?? ?My ZbitX is on the way and want to do something like that. Thank you Jim KE0VVu

Stand attached between 2 aluminum heatsinks. [email protected]> wrote:

Ron, We're sorry to hear that you are facing this problem. I've emailed you about this. Please have a look and get back to us. 73, Ragav VU3VWR

Leo, one addition: please report the issue on this page: https://github.com/afarhan/zbitx/issues -- Gyula HA3HZ

Eliminating de minimis will be a big nuisance, and will end up costing more than just the tariff does. In Europe they have to collect taxes from the recipient, and the fee that the big shipping

Joel, I remembered you had some kind of cat problem and I couldn't remember the solution. That's why I asked. Joe, the problem is with a fellow amateur, not with the settings. Cat doesn't work on

This id not work for me. Getting no output sound and hamlib errors. Leo, AI5Ii wrote:

Andy, I don't have a "desire" to only hear "what is", I was simply pointing out that we were talking about two different things - me discussing what is, you discussing what might be. Both are equally

Bill, Could you share a photo of how you attached those stands? '73

Ken - there are additional orders which go into much more detail than provided by the fact sheets.? While China appears to be the first country to have the de minimis exclusion removed, other

Thanks Bob for being on topic. At least it’s probably being addressed. N6ALT Joel

I noticed this a week ago and filed it as issue #27. It is apparent if you center a CW signal in filter width at 2.5 kHz display width, the tone heard is the correct sidetone frequency Change display

Thanks for suggesting to try a different cable - turns out that was the issue. Now upto v1.06 :) 73 Peter VK3TKK

If this does not work, I suspect some compile files are missing some data. Joe VE1BWV [email protected]> wrote:

WSJT-X Audio Setup 1. Settings-Audio, Soundcard Input: plughw:CARD=Loopback,DEV=1 2. Settings-Audio, Soundcard Output: plughw:CARD=Loopback_1,DEV=0 3. Right click speaker icon upper menu