开云体育

I have been having problems where my keyboard keeps disconnecting , I haven't gone too deep to see what the issue is yet. [email protected]> wrote:

Thank you for sharing. ?I was going to use the ultra low profile knob for the trusdx and trim the shaft way down. Ryan Kk6dzb

Factory version of the frontpanel firmware needs to be updated, and while you are it , do a ./update for the zbitx software as

Build a new SD-card (abour 32Gbyte) with a flasher-software like Balena Etcher. Download the Image and unzip it First. -- Tilman D. Thulesius *SM0JZT / Sweden*

Unfortunately exactly the same with my zBITX. Gerald - HB9CEY

Yep, it’s missing a lot of your leading dots, suggesting that the sampling just ?isn’t fast enough. ?So your W started with dashes, and a lot of other characters are similarly mangled It was

I had to re-load mine two or three times and it finally started booting up (Tnx HB9CEY).

How do I restore the image? Leo? AI5II

Enable Bluetooth on the desktop turn on your keyboard and tell Bluetooth to scan for devices. ?You can then pair from there. ?On Linux I usually have a problem where Bluetooth wants to repeatedly

I had already executed this command without success. I had already executed this command, without success. Everything is still as shown in the pictures. Am 02.04.2025 um 20:30 schrieb Ashhar Farhan

https://ae5x.blogspot.com/2025/04/timing-issues-remain-with-latest.html 73, John AE5X

On that prompt, type ./build sbitx wrote:

Hello everyone, I understand that the zBitx has Bluetooth onboard the Raspberry Pi. Is there a way I can set up my Bluetooth keyboard with a track mouse to the Raspberry Pi on the zBitx? Any

Hallo! After updating the zBitx software and firmware, the zBitx no longer starts properly. Repeating the update does not work.. What can I do to get the zBitx working? vy73 Frank

I use these to help dissipate the excess heat. Slap them on back and let them do their job. Also use on Xeigu 6200. https://a.co/d/bpyIFQg

What was your order number

Ryan, I'm sorry to hear that the zBitx arrived with a crack. I'm guessing the parcel had a rough journey to your location. Can you share some photos of the radio and the packaging with us. You can

Hello All, I wanted a dimpled knob for the front of my zBitx, so I turned to Thingiverse to find a suitable knob and adjust the size to what I wanted and 3D printed my own in black PLA. The knob I've

Ensure your software and firmware are at the latest versions. I also have found a power cycle helps with this.

Hi Farhan I loaded firmware 1.06 and I am very happy the chugging sound has gone from cw reception. This afternoon listening on ssb 20m I did notice some less pronounced chugging sounds. I will try