开云体育

Encoders are cheap enough that you could get a lifetime supply, and swap it out and see if that fixes it. https://a.co/d/gJcHhrS

Hi to the group -- The rotary encoder skips during rotation. I've seen this before on other project but can't remember how it is fixed. Should I replace the encoder ? Thanks in advance -- Rick W7RNB

We were told in Feb. Feb. Passed, nothing shipped We were told the first of this week,? in March.? ?So far nothing shipped and no communication sent to list so that the 250 people who ordered know

Gordon: Is I possible to download the CW (Decode / Encode / Keyer) portion of the sbitx software and play with these functions on a Pi 5 as I am not ready (funds) to make the leap to the radio

If the board doesn't have polarity protection, I imagine you can add it with a small 2S 18650 BMS board. It'd also allow you to charge the batteries while they remain in the device if you wanted to do

Hi Vule, As TX disappears - I agree with Evan - relay is in this situation is most suspected. K1 is the first from the left, however also K3 - first from the right can also be the case. K1 is

Yes, that’s what I was testing today, and just wrote about.

Hello, Now that I've purchased some flat top 18650s, I'm thinking that one could easily mix up polarity on these.? What happens if someone inserts both batteries backwards?? I'm assuming that full

Hi Vule, Raj has more experience with the uBitx than I do. However, the symptoms you describe indicate a stuck K1; here, the Nano is commanding the relay to be off, but the TX is still on and not

Hi Shawn, Those who seek will find. I looked into the linked website and Georgy published his modifications two months ago. For coders, this can be a call to attention for modifications, since sbitx

Vule, Just replace the front panel mic socket. It may be a problem, just a thought! Raj

Tomasz, things are like this: 1) I have original screen and TX is disapearing normaly but PTT stays ON and there is no modulation going out. 2) I did not happend on SSB, only on digital, in the

Just to add to Evans first para. If a diode has failed or mostly bad solder then the RX would have dropped sensitivity. Good Luck with a fix! Raj, vu2zap

Hi Ted, The short answer is that both the calibration (master and BFO) settings can cause the filter to be misaligned with the signal.? Also, it can be a failure in the modulator in that one-half of

I just tried gdyuldin’s fork: https://github.com/gdyuldin/ft8_lib It looks promising: I can receive longer callsigns, can send with a suffix (LB2JK/QRP), and on pskreporter I can see that my

I was doing POTA yesterday with the V.5 shown in my avatar, when a caller asked me if I was [intentionally] running double sideband.? He was really cool about it and volunteered to send a short video

I use WSJT-X on the sBitx. The screen scaler leaves me with text that is too small to read and you can't see the bottom of the WSJT-X window unless you use the X-Large setting. Fortunately the screen

Hi Vule, To start narrowing the issue we would like to know if "TX" is still hanging on the screen while PTT is OFF. regards Tomasz

This problem is due to the ft8 library used in the sBitx software. This was already brought up by Shawn, K7IHZ, in this

Yep it’s a known problem with ft8_lib. I was trying to hack on that a few months ago: https://github.com/kgoba/ft8_lib/compare/master...ec1oud:ft8_lib:master It wasn’t complete enough to work