开云体育

Hello Mathis, The Nano's stock firmware will not work with a Nextion screen.? You also need to find the correct TFT file for your Nextion display or edit one from an HMI file and the Nextion

Hello, I am new in this Board. I say hello to this amazing community ! A buildet an uBitx v6 with an 2.8 Standard Screen an it works fine. Now i bought an 5 inch Nextion display and it did not

Hello all, Has anyone tried using Gridtracker with JJ’s sBitx 64-bit OS? I don’t believe that there is a 64-bit version of Gridtracker so you would have to use the 32-bit version or would it have

I don't have a V3 sBITX so this might be totally wrong. That said, the IDE connector appears to be 1x5 (5 pins) connector rather than a 2x5 (10 pins). If it were me, I'd use some wire snips to cut

H Aaron, It is a known fact.? Electrically, you can move the connector to the other side of the board.? In the supplied case, this interferes with the display as the tuning and function encoder are

There was a point in my life, right after I received my sBITX V3, when I made the declaration that the sBITX is the very best radio that I have ever used. I have probably used around 50-75 different

Yes, that is the plan when I get around to releasing it. My family and work life have been taking priority at the moment. -JJ

The foundations must be set well. See related descriptions on sbitx.net. Now I leave it to you, but I don't know when and how well your device was adjusted at the manufacturer. Mine is from the first

Thanks. I will look into the other software. The encoder has been replaced with a spare from Qrp Labs. 73 John

Yes, this is exactly the issue I'm having.? It drops the output volume to 76% even though I have the power setting in wsjtx at max.? I need every bit of power I can get, ha!

Finally got around to testing the v3 on my SA after recalibration. I am pleased to see that the harmonics were within spec of the FCC Part 97 Section D emission standards for all bands (-43dB or

Sounds great! I think that’s the proper correction Gordon

I made a change to get rid of the error as the treble change commands were not working. The change I made was in the sbitx_gtk.c file by adding const to the field_set definition like so: int

On Mon, Mar 18, 2024 at 04:19 AM, Paul wrote: > > Latest update: > Replaced Jabra headset with a UGREEN branded usb sound card that takes > 3.5mm jack inputs for speaker/microphone. Using a splitter

Thanks Paul, that’s not part of my portion….. That’s great if it works!

I have a similar if not the same problem. My transmit power is very low in all modes.? This is with a 1:1 SWR. But, if during transmit, I slide the volume slider up I can raise the power to what

still in testing mode yet but when I rebuilt sbitx with your revised files, i got an error: pi@sbitx:~/sbitx $ ./build sbitx >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Mon Mar 18 03:21:11 PM GMT

Regarding the SSB peaks. I haven't put this on an oscilloscope -- and won't know until I do -- but i have always felt the analog-measured average powers when speaking into a microphone were very

interesting.

Using sbitx with an external HDMI monitor and JTDX and CQRLOG operation. Screencast 2024 03 17 14 16 05 ( https://www.youtube.com/watch?v=eAZ13L7He9I ) The video was made without the addition of