Re: YouTube Influencer Sbitx
My question of you after looking at your web site. Are you a licensed radio amateur?
toggle quoted message
Show quoted text
On 11/28/2022 11:10 AM, ETAPRIME wrote: Preston Roberts
|
Re: YouTube Influencer Sbitx
Hi Lou,
I'm so glad my videos entertain and inform you. Thank you for Ashhars contact information. I will email him today.?
Thanks,
ETA PRIME? Preston Roberts?
toggle quoted message
Show quoted text
-------- Original message -------- From: Lou KI5FTY <lscalpati@...> Date: 11/28/22 1:50 PM (GMT-05:00) Subject: Re: [BITX20] YouTube Influencer Sbitx
Hi Preston, I too enjoy your videos!? Thanks and keep up the great work!
On Mon, Nov 28, 2022 at 10:22 AM ETAPRIME < etaprime@...> wrote:
Hi I am Preston Roberts, I run a YouTube channel focusing on Technology. I would love to showcase the Sbitx on my channel but I don't know who I need to talk to about getting a demo unit in here to Review.?
Thanks again
ETA PRIME? Preston Roberts?
|
Re: #sbitx upgrade kit 2 is on the way
#sBitx
When is there a new release planned I want to order the dev unit
toggle quoted message
Show quoted text
On Nov 28, 2022, at 10:43, Gordon Gibby <docvacuumtubes@...> wrote:
At first glance, this looks great!? ? Thanks very much will be waiting to get this done over the Christmas holidays here.? ?In 5.2 you use the word "scrap"? whereas in American-eze I think it would be "scrape"? ?to scrape off a bit of masking.
Looks very "do-able" to me.? ? I'll be excited to get back to work on it after spending a lot of time working with VARA-C and VHF digipeating and helping members of our group?figure out soundcard systems......
Gordon? KX4Z
On Mon, Nov 28, 2022 at 9:51 AM Ashhar Farhan < farhanbox@...> wrote: Peeps, Sorry for the inordinate delay. We were awaiting?a shipment from Mouser that too days to arrive with IRFZ24Ns. The upgrade kit will be picked up by the courier tomorrow and everyone who has an sbitx will receive the kit in about?2 weeks from now. You can see the instructions (updated and tested on five boards) at?
- f
|
Re: #sbitx upgrade kit 2 is on the way
#sBitx
Ashhar,
No need to apologize for any delay..as long as we end up with the phenomenal rig that was planned at the beginning!
thank you
Vince
n2aie?
|
Re: YouTube Influencer Sbitx
toggle quoted message
Show quoted text
Hi Preston, I too enjoy your videos!? Thanks and keep up the great work!
On Mon, Nov 28, 2022 at 10:22 AM ETAPRIME < etaprime@...> wrote:
Hi I am Preston Roberts, I run a YouTube channel focusing on Technology. I would love to showcase the Sbitx on my channel but I don't know who I need to talk to about getting a demo unit in here to Review.?
Thanks again
ETA PRIME? Preston Roberts?
|
Re: YouTube Influencer Sbitx
Hi Preston, I too enjoy your videos!? Thanks and keep up the great work!
On Mon, Nov 28, 2022 at 10:22 AM ETAPRIME < etaprime@...> wrote:
Hi I am Preston Roberts, I run a YouTube channel focusing on Technology. I would love to showcase the Sbitx on my channel but I don't know who I need to talk to about getting a demo unit in here to Review.?
Thanks again
ETA PRIME? Preston Roberts?
|
Re: YouTube Influencer Sbitx
Hi Shane!
Thank you for your kind words. I enjoy all my subscribers!?
ETA PRIME? Preston Roberts?
toggle quoted message
Show quoted text
-------- Original message -------- From: Shane <wombat7669@...> Date: 11/28/22 11:38 AM (GMT-05:00) Subject: Re: [BITX20] YouTube Influencer Sbitx
Hi ETAPRIME!!!
I absolutely love your?channel!! I hope Ashhar decides to send him a unit. I'd love to see what he says about it. And he's got a lot of subscribers. It's cool he's wanting to review this.
On Mon, Nov 28, 2022, 11:22 AM ETAPRIME < etaprime@...> wrote:
Hi I am Preston Roberts, I run a YouTube channel focusing on Technology. I would love to showcase the Sbitx on my channel but I don't know who I need to talk to about getting a demo unit in here to Review.?
Thanks again
ETA PRIME? Preston Roberts?
|
Re: #sbitx upgrade kit 2 is on the way
#sBitx
I am hoping to get direwolf going soon on sbitx, gordon. - f
At first glance, this looks great!? ? Thanks very much will be waiting to get this done over the Christmas holidays here.? ?In 5.2 you use the word "scrap"? whereas in American-eze I think it would be "scrape"? ?to scrape off a bit of masking.
Looks very "do-able" to me.? ? I'll be excited to get back to work on it after spending a lot of time working with VARA-C and VHF digipeating and helping members of our group?figure out soundcard systems......
Gordon? KX4Z
On Mon, Nov 28, 2022 at 9:51 AM Ashhar Farhan < farhanbox@...> wrote: Peeps, Sorry for the inordinate delay. We were awaiting?a shipment from Mouser that too days to arrive with IRFZ24Ns. The upgrade kit will be picked up by the courier tomorrow and everyone who has an sbitx will receive the kit in about?2 weeks from now. You can see the instructions (updated and tested on five boards) at?
- f
|
Re: #sbitx upgrade kit 2 is on the way
#sBitx
Joel, The ones not yet shipped will be shipped with the updates applied. They should go out this week as well. - farhan
On Mon, Nov 28, 2022 at 11:00 PM Joel Caulkins/N6ALT < caulktel@...> wrote: Farhan,
Does this mean that those of us that paid for one of the Developers edition but never received it pending the fix will be getting ours soon?
Joel
N6ALT
|
Re: #sbitx upgrade kit 2 is on the way
#sBitx
Farhan,
Does this mean that those of us that paid for one of the Developers edition but never received it pending the fix will be getting ours soon?
Joel
N6ALT
|
Re: YouTube Influencer Sbitx
Hi ETAPRIME!!!
I absolutely love your?channel!! I hope Ashhar decides to send him a unit. I'd love to see what he says about it. And he's got a lot of subscribers. It's cool he's wanting to review this.
On Mon, Nov 28, 2022, 11:22 AM ETAPRIME < etaprime@...> wrote:
Hi I am Preston Roberts, I run a YouTube channel focusing on Technology. I would love to showcase the Sbitx on my channel but I don't know who I need to talk to about getting a demo unit in here to Review.?
Thanks again
ETA PRIME? Preston Roberts?
|
Sure, it'll work fine. Pick an electret mic type that Ashhar has
blessed, and adjust the mic wiring appropriately.
I think you can put the DC voltage onto the "hot" audio lead of the
3-wire XLR interface.
I've never tried it but I happen to have a rather nice XLR mic and
audio processing unit that came in a station purchase, and when I prep
my Heath DX-100 for operation, I'll definitely use this mic when I'm
not using one of my Astatic D-104s with a new electret element.
I'd mention -- back in the day I made a 5-pin DIN mic switchbox so I
could test and use all the old CB mics I'd collected over the years on
my Atlas 210X. Being able to switch mics on the fly was fun, and it
sometimes confused toe ham on the other end of the QSO.
73
Jim N6OTQ
|
Re: #sbitx upgrade kit 2 is on the way
#sBitx
Allison,
Thank you for responding.??I did remember the discussion.? That was before the latest announced changes to the TR switching.? ?I was checking to make sure the 2n7000 was still needed.? Per the prior information provided, I thought it was still a good thing to have.
Maybe Farhan will update the schematic with both of us commenting.
As always, I appreciate all of the free knowledge that you share.? It helps me learn more about RF circuits and RF design.
73
Evan
AC9TU
|
Hi I am Preston Roberts, I run a YouTube channel focusing on Technology. I would love to showcase the Sbitx on my channel but I don't know who I need to talk to about getting a demo unit in here to Review.?
Thanks again
ETA PRIME? Preston Roberts?
|
Re: #sbitx upgrade kit 2 is on the way
#sBitx
Evan,
pet peve, schematis do not match the board.?
the 2n7000 is the complment of the pmos switch that ensbles +12 to the tx bias. The nmos part is used to rapidly pull that line to ground. ?
It was discussed maybe 3 months ago.?
--
Allison
------------------
Please use the forum, offline and private will go to bit bucket.
|
Re: #sbitx upgrade kit 2 is on the way
#sBitx
At first glance, this looks great!? ? Thanks very much will be waiting to get this done over the Christmas holidays here.? ?In 5.2 you use the word "scrap"? whereas in American-eze I think it would be "scrape"? ?to scrape off a bit of masking.
Looks very "do-able" to me.? ? I'll be excited to get back to work on it after spending a lot of time working with VARA-C and VHF digipeating and helping members of our group?figure out soundcard systems......
Gordon? KX4Z
On Mon, Nov 28, 2022 at 9:51 AM Ashhar Farhan < farhanbox@...> wrote: Peeps, Sorry for the inordinate delay. We were awaiting?a shipment from Mouser that too days to arrive with IRFZ24Ns. The upgrade kit will be picked up by the courier tomorrow and everyone who has an sbitx will receive the kit in about?2 weeks from now. You can see the instructions (updated and tested on five boards) at?
- f
|
Re: #sbitx upgrade kit 2 is on the way
#sBitx
Farhan, On the sBitx that I received, there is a 2n7000 MOSFET soldered on the underside of the main board.? I have not been able to find it on the schematics.? Is it required?? If so, the schematic should be updated.? Here is a picture I took before I removed it when it was blown with my failed software-based sequencing mode:  73 Evan AC9TU
|
Re: #sbitx upgrade kit 2 is on the way
#sBitx
Ashhar, The instructions look great.
Thank you, Phil
|
#sbitx upgrade kit 2 is on the way
#sBitx
Peeps, Sorry for the inordinate delay. We were awaiting?a shipment from Mouser that too days to arrive with IRFZ24Ns. The upgrade kit will be picked up by the courier tomorrow and everyone who has an sbitx will receive the kit in about?2 weeks from now. You can see the instructions (updated and tested on five boards) at?
- f
|
I have an old XLR microphone. Its body of it is in good shape. Could I get an electret microphone element and redo the workings of it?? -- '72
Aaron K5ATG
|
ETAPRIME
Vince N2AIE
Joel Caulkins/N6ALT
ETAPRIME
Aaron K5ATG