Re: Zbitx RPI SD-card image needed
Ashhar
?
Just for giggles I did try the ./update thingy. Here is the output. Might ring a bell for you that understand far more then myself:
pi@sbitx:~/sbitx $ ./update
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Tue ?1 Apr 09:32:27 MST 2025
remote: Enumerating objects: 11, done.
remote: Counting objects: 100% (11/11), done.
remote: Compressing objects: 100% (1/1), done.
remote: Total 6 (delta 5), reused 6 (delta 5), pack-reused 0 (from 0)
Unpacking objects: 100% (6/6), done.
From https://github.com/afarhan/zbitx
? ?8da6d22..b9cabb4 ?main ? ? ? -> origin/main
Already up to date.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Tue ?1 Apr 09:32:29 MST 2025
database is intact
compiling sbitx version v3.021 in /home/pi/sbitx
/usr/bin/ld: cannot open output file sbitx: Permission denied
collect2: error: ld returned 1 exit status
pi@sbitx:~/sbitx $?
--
Tilman D. Thulesius
SM0JZT / Sweden
|
Adding 2 x 1nF caps to my bencher paddle did not help
|
Re: zBitX ft8 TX signal comes speaker
Well, rats!! ? Sorry!!?
Gordon kx4z.?
toggle quoted message
Show quoted text
On Apr 1, 2025, at 12:16, Benjamin Kelley - KC0BLK via groups.io <benjamin.kelley@...> wrote:
? Thanks for the tip. ?Unfortunately it does look like split is off.
?
--ben
|
Re: zBitX ft8 TX signal comes speaker
Thanks for the tip. ?Unfortunately it does look like split is off.
?
--ben
|
Re: Z bitx when is the order page to re-open
Is there a warranty? I don't see anything on the website.?
toggle quoted message
Show quoted text
-------- Original message --------
From: "Ashhar Farhan via groups.io" <farhanbox@...>
Date: 4/1/25 11:12 AM (GMT-05:00)
Subject: Re: [BITX20] Z bitx when is the order page to re-open
We had to bump up the price to be able to buy key components faster (ex-stock). We have also been hit by some strange duty getting the PCBs from China. We had to bump the price up by 20 dollars.?
Our vision was really to do a $100 dollar SDR, it just got escalated?to 169 USD
- f
On Tue, Apr 1, 2025 at 7:49?PM Darrell Davis KT4WX via
<kt4wx= [email protected]> wrote:
Good Day Everyone:
?
I got my email notifying me that orders were being accepted at 0202 EDT, while I slept.? I ordered mine at 0635 EDT, right after getting up and getting ready for work.? My order number is #3634.? Like someone else said, "who hoo!"? It has been a long wait
but well worth it.? The product is a better product for the wait.? The support on this list is wonderful.? Now I need to go and read the manual :-)
?
When you buy a loaf of bread at WalMart, it says on the package, "Baked with Love."? In this case HF Signals could say, "Soldered and assembled with Love".? :-)
?
73 de Darrell KT4WX
-- Mike - K8MCB?
|
I cleared out /var/log and I updated the software this morning. The CW keying in Iambic B is still rough... at 22 WPM keying K gets me a Q maybe 20% of the time. I tested this with two paddles
Ashhar, was the zBitx tested on CW in both iambic modes before being released for sale?
|
Re: Zbitx RPI SD-card image needed
Ashhar
?
Thank you so very much for your attempts. I have tried it , but no luck :-(
Here the output:
pi@sbitx:~ $ cd sbitx
pi@sbitx:~/sbitx $ git checkout master
error: pathspec 'master' did not match any file(s) known to git
pi@sbitx:~/sbitx $ ls -l master*
ls: cannot access 'master*': No such file or directory
Bottom line is I guess that I still need to build a new SD-card with a fresh image. Thank you in advance.
?
?
--
Tilman D. Thulesius
SM0JZT / Sweden
|
Ashhar, was the zBitx tested on CW in both iambic modes before being released for sale?
|
This just the kernel latency.
Btw, I had some dramatic increase in responsiveness of the radio when I deleted everything in /var/log
Could this be as simple as debouncing the keying circuit? I have a 0.1 uf disc ceramic across the output of my J-36 paddles to prevent this. Lee KX4TT On Tuesday, April 1, 2025 at 11:00:00 AM EDT, Gerald via <hb9cey= [email protected]> wrote: The new firmware v1.05 / v3.051 is slightly better than before, but since CW still doesn't work properly for me even with the new firmware, I compared it with the QCX-Mini. Both transceivers were keyed and monitored in parallel, at the same speed, using a paddle. I also tried unsuccessfully with another paddle. ? While the QCX-Mini didn't lose any characters, the zBITX repeatedly produced errors, dots and dashes were lost or appended. This happened at slow and also faster speeds. This reminds me of my simple diy touch paddle where I always had to wet my fingers otherwise exactly such errors occurred. ? It seems strange to me that everything works fine for other users. ? If I use a macro from the zBITX to transmit, the zBITX keys everything flawlessly up to 50 wpm. No lost dots or dashes. How can this be, and where is the difference between keying by macro and the paddle input? I'm neither an IT nor an electronics engineer, but I would first look for the problem with the key input. Perhaps someone can explain this to me. ? 73, Gerald
|
Could this be as simple as debouncing the keying circuit? I have a 0.1 uf disc ceramic across the output of my J-36 paddles to prevent this.
Lee KX4TT
On Tuesday, April 1, 2025 at 11:00:00 AM EDT, Gerald via groups.io <hb9cey@...> wrote:
The new firmware v1.05 / v3.051 is slightly better than before, but since CW still doesn't work properly for me even with the new firmware, I compared it with the QCX-Mini. Both transceivers were keyed and monitored in parallel, at the same speed, using a paddle. I also tried unsuccessfully with another paddle.
?
While the QCX-Mini didn't lose any characters, the zBITX repeatedly produced errors, dots and dashes were lost or appended. This happened at slow and also faster speeds. This reminds me of my simple diy touch paddle where I always had to wet my fingers otherwise exactly such errors occurred.
?
It seems strange to me that everything works fine for other users.
?
If I use a macro from the zBITX to transmit, the zBITX keys everything flawlessly up to 50 wpm. No lost dots or dashes. How can this be, and where is the difference between keying by macro and the paddle input? I'm neither an IT nor an electronics engineer, but I would first look for the problem with the key input. Perhaps someone can explain this to me.
?
73, Gerald
|
Re: Z bitx when is the order page to re-open
On Tue, Apr 1, 2025 at 09:19 AM, Darrell Davis KT4WX wrote:
When you buy a loaf of bread at WalMart, it says on the package, "Baked with Love."? In this case HF Signals could say, "Soldered and assembled with Love".? :-)
?
73 de Darrell KT4WX
?
?
What are you smoking?
|
|
|
Re: Z bitx when is the order page to re-open
We had to bump up the price to be able to buy key components faster (ex-stock). We have also been hit by some strange duty getting the PCBs from China. We had to bump the price up by 20 dollars.? Our vision was really to do a $100 dollar SDR, it just got escalated?to 169 USD - f
On Tue, Apr 1, 2025 at 7:49?PM Darrell Davis KT4WX via <kt4wx= [email protected]> wrote: Good Day Everyone:
?
I got my email notifying me that orders were being accepted at 0202 EDT, while I slept.? I ordered mine at 0635 EDT, right after getting up and getting ready for work.? My order number is #3634.? Like someone else said, "who hoo!"? It has been a long wait but well worth it.? The product is a better product for the wait.? The support on this list is wonderful.? Now I need to go and read the manual :-)
?
When you buy a loaf of bread at WalMart, it says on the package, "Baked with Love."? In this case HF Signals could say, "Soldered and assembled with Love".? :-)
?
73 de Darrell KT4WX
|
Re: Does sequence of updates matter?
I had to do the update at least twice each time, then it worked.
|
The new firmware v1.05 / v3.051 is slightly better than before, but since CW still doesn't work properly for me even with the new firmware, I compared it with the QCX-Mini. Both transceivers were keyed and monitored in parallel, at the same speed, using a paddle. I also tried unsuccessfully with another paddle.
?
While the QCX-Mini didn't lose any characters, the zBITX repeatedly produced errors, dots and dashes were lost or appended. This happened at slow and also faster speeds. This reminds me of my simple diy touch paddle where I always had to wet my fingers otherwise exactly such errors occurred.
?
It seems strange to me that everything works fine for other users.
?
If I use a macro from the zBITX to transmit, the zBITX keys everything flawlessly up to 50 wpm. No lost dots or dashes. How can this be, and where is the difference between keying by macro and the paddle input? I'm neither an IT nor an electronics engineer, but I would first look for the problem with the key input. Perhaps someone can explain this to me.
?
73, Gerald
|
Re: Does sequence of updates matter?
|
Re: Does sequence of updates matter?
I have done it in different orders and no issues. Are you seeing a waterfall?
This morning I updated the zBitx to v1.05 then updated the RPi to v3.05.
Should I have done these in the opposite order? The radio will not boot up now.
"Waiting for the zBitx to start..." Only this, and nothing more.
|
Re: Does sequence of updates matter?
Farhan said it doesn't matter but recommended doing the RPi first.
?
Joel
N6ALT
|
Re: Z bitx when is the order page to re-open
Good Day Everyone:
?
I got my email notifying me that orders were being accepted at 0202 EDT, while I slept.? I ordered mine at 0635 EDT, right after getting up and getting ready for work.? My order number is #3634.? Like someone else said, "who hoo!"? It has been a long wait but well worth it.? The product is a better product for the wait.? The support on this list is wonderful.? Now I need to go and read the manual :-)
?
When you buy a loaf of bread at WalMart, it says on the package, "Baked with Love."? In this case HF Signals could say, "Soldered and assembled with Love".? :-)
?
73 de Darrell KT4WX
|
Re: Z bitx when is the order page to re-open
I noticed that the price has increased, it's now $197.00 shipped, I'm still waiting for the US postal system to decide to deliver mine to my door. It's been stuck in Portland OR for a week now, only 350 miles from my home.
?
Joel
N6ALT
|
Tilman, SM0JZT
Lee
Joel Caulkins/N6ALT
Darrell Davis KT4WX