¿ªÔÆÌåÓý

Good morning My zBitx arrive DOA.? I sent a message HFSIGNALS but got no response.? It will not power up with the connector in place.? I used my multimeter to test the power on the connector from

Hi all - While everyone has been busy with s and the z I've gone back to basics with a bitx20 inspired, all-analog SSB rig.? ?In a fit of "spontaneous construction" [(C) N2CQR] I put togeter the

OTG stands for "on the go" It's use is usually associated with USB adapters to used connect peripherals to smart phones.

Email <sales at HFSignals dot com> and ask them to be put on the list and notified when sales are open. 73 Evan AC9TU

Wondering when it would be possible to order a z bitx ? Thanks

Hi 20% in France either about 33€... Will see 1 april for me 73 Patrick

* USB On-The-Go ( https://en.wikipedia.org/wiki/USB_On-The-Go ) * -- Gyula HA3HZ

I wonder how much VAT and DHL is... 73'

I know this is probably a dumb question but what does ¡°OTG¡± stand for? I don¡¯t think I¡¯ve ever heard of it. Tanks, Robert AG6LK

The term is "iambic", pertaining to a dihDAH dihDAH dihDAH pattern, each of the three sounds in the above called an "iamb". This are "I" as in India, not "L" as in Lima. Also, "Lambic" is a real

Right. There is a reason why this pinout is not the normal one. Would love to reroute my radio connector so that i can use my microphones without having to put a adapter cable inbetween. -- Tilman D.

Wouldn't miss it for the world, Gordon! I just got a 9v PD trigger cable that works perfectly, and I got an 8-pack of 18650 cells and a 4-place charger. 3300mAh and 4.2 volts. And I find that the hand

The joys of bringing out a new product! Gordon kx4z

Same. John AE5X

That's easy to fix to an obvious error. Bill K9YEQ Scottsdale, AZ ________________________________ Sent: Friday, March 28, 2025 9:13:26 AM To: [email protected] <[email protected]> Subject: Re:

I have added this issue to the Github bug report page. It is issue #6. 73, Gwen, NG3P

Similar behavior here, one additional note. Logged contacts show on the HDMI screen, but log is blank on the radio if viewed before the radio is locked up. Sent from me and my iPad

I have tried CW with an external keyer of type K3NG and cw_input set to straight on the zBITX. But with no success. The connection between the keyer and zBITX is a Stereo cable. Does it need a mono

Additional info. I managed to get a Bluetooth keyboard/trackpad device connected to the zBitX, and it works fine. With that set up using a borrowed keyboard/trackpad, I used the HDMI screen and Pi

Ok. * I managed to get the WiFi going, which updated the time. Now I'm seeing decodes in the FT8 screen I wasn't seeing before. * I ran the update for the firmware on the pi from the HDMI screen. * I