开云体育

The term is "iambic", pertaining to a dihDAH dihDAH dihDAH pattern, each of the three sounds in the above called an "iamb". This are "I" as in India, not "L" as in Lima. Also, "Lambic" is a real

Right. There is a reason why this pinout is not the normal one. Would love to reroute my radio connector so that i can use my microphones without having to put a adapter cable inbetween. -- Tilman D.

Wouldn't miss it for the world, Gordon! I just got a 9v PD trigger cable that works perfectly, and I got an 8-pack of 18650 cells and a 4-place charger. 3300mAh and 4.2 volts. And I find that the hand

The joys of bringing out a new product! Gordon kx4z

Same. John AE5X

That's easy to fix to an obvious error. Bill K9YEQ Scottsdale, AZ ________________________________ Sent: Friday, March 28, 2025 9:13:26 AM To: [email protected] <[email protected]> Subject: Re:

I have added this issue to the Github bug report page. It is issue #6. 73, Gwen, NG3P

Similar behavior here, one additional note. Logged contacts show on the HDMI screen, but log is blank on the radio if viewed before the radio is locked up. Sent from me and my iPad

I have tried CW with an external keyer of type K3NG and cw_input set to straight on the zBITX. But with no success. The connection between the keyer and zBITX is a Stereo cable. Does it need a mono

Additional info. I managed to get a Bluetooth keyboard/trackpad device connected to the zBitX, and it works fine. With that set up using a borrowed keyboard/trackpad, I used the HDMI screen and Pi

Ok. * I managed to get the WiFi going, which updated the time. Now I'm seeing decodes in the FT8 screen I wasn't seeing before. * I ran the update for the firmware on the pi from the HDMI screen. * I

many thanks. we will wait, and i imagine that until next week there will be no update. then comes the vat receipt and the handling of the paperwork by dhl.

Forgot to add, once they submit the request for drop off/pickup you will get an email from DHL before they update the Order status. [email protected]> wrote:

Took 1-2 days for me. [email protected]> wrote:

You will receive a notice from DHL.? I believe HFS is able to ship about 30 a day.? Mine shipped on Thursday (yesterday) and DHL expects I will get it on this coming Tuesday.? I am in "Winterpeg"

Hello, since the early hours of yesterday, mine is about to leave HF signals, according to its website, but I have not received any notice from the carrier indicating that it is on its way. How long

No. USB won't have enough power to run the PA. You can power the CPU(Raspberry PiZ ) but you won't be able to TX. <leomaniolone@...> wrote:

If the zbitx USB is used to load firmware without voltage applied snd the zbitx powers up to perform that task, is it possible to run the transciever from a 5v USB power pack rather than from the

I saw someone mention that the two terminals on the battery were not connected. To chain the 2 batteries together. Maybe it was a step that was skipped in manufacturing. [image: image.png] groups.io

That place is sbitx.net. We are behind with the manual. It should be up very soon. - f groups.io <starmke1998@...> wrote: