The download is up to you.
Anyone can download it if you know the link and have a downloader that can continue to download after interruption.
The link is a drive.google link available.
Next to the device, you received a note on measurement results in the box.
So since May you have received this, who ordered a complete device.
You only not received a CR2032 battery because it is not accepted by the supplier (hazardous substance).
If you have a complete device, it must also include the SD Card.
I bought it without RPi, and I got the SD Card in a separate bag.
Look at the box. You may have fallen out and you will find it below.
--
Gyula HA3HZ

Bullseye is available on the Raspberry Pi website and Imager app:

开云体育

I have notified hf dignal support ?of the inability to download ( nothing via mac and a windows pc).?

I figured it out. I had cloned the repo into /home/pi/Docuements. It needs to be cloned into /home/pi.? As a suggestion, could the code look for supporting files relative to where the sbitx file is located?
--
73,
Mark, N8ME

link with the latest version:?
--
Gyula HA3HZ

I understand now. You need to send a message to the seller's support@... address, the solution is there.
If you want to download the nearly 3GB file, you can only do so with a browser or download manager that is capable of continuing the interrupted download.
For example, I use IDM integrated in the browser.
But there are several options.
Depending on the operating system, you then unzip this 3GB file and copy it to the SD card as an image.
Since 32GB turns out to be small in many cases, it is advisable to copy it to a 64GB and high-quality card.
I hope this helps.
--
Gyula HA3HZ

I was using an older install.txt file that didn't have the iptables instructions. I added the iptables commands found in the install.txt cloned from the repo. Now, I do connect to sbitx.local (port 80), but it's still just giving me the directory page. This is both on the RPi touch screen and if I try to connect with a web browser from another computer.

The command ./build sbitx completes without error and the old-style radio display on the RPi touch screen seems to launch and work just fine. It's just that when it lauches the web browser, it comes up with the directory. It's like it's not finding the directory with the HTML code.

I cloned the repo into the Pi's ~/Documents folder so the source code is in /home/pi/Documents/sbitx is that right or does it matter?
--
73,
Mark, N8ME

开云体育

KF0ARU. ?I bought a finished unit. Not a kit

Carl
do you have a call sign
Can you tell me what you bought?
complete device or boxed device without RPi or an assembled panel?
You are raging here on the net, while ignoring any helper.
If you want to download the contents of the SD card, the iPad is not enough for that, I'm just telling you.
--
Gyula HA3HZ

Well they sent me a link to download the new Files guess what it fails on two different computers it times out I cannot get it so I tried on my iPhone I got the file but guess what when it tries to extract it fails with an unknown error.

Fred,

What do you mean?? I just snipped the display from my browser, I didn't include the address line, but it was

sbitx.local is recognized on my LAN. I can PING it and SSH into the sbitx pi with that address.
--
73,
Mark, N8ME

I thought there was another release. Only June 21st is what I see.
--
Gyula HA3HZ

I get the directory page on port 8080. My browser can't connect at all on port 80. I ran top and only see one copy of sbitx running.


--
73,
Mark, N8ME

?I did not get a new SD card with the board and HF signals is saying I should have. At least they can email me the files

The next email I got said I should replace the raspberry pi. This infuriates me because I bought a complete unit not a kit. Their defective motherboard has caused the issues with the rpi.

I just built the latest version of sBitx from Ashar's github repo. When it starts, instead of displaying the web interface, it displays a generic directory page at port 8080. I can't connect to it on port 80.?


--

I can ping the sBitx (ping sbitx) and access it via ssh (ssh pi@sbitx), but to get the web browser (Edge) to display the directory page, I have to use the ip address (192.168.2.50:8080).

This is on the DE and I'm accessing it from Windows 10.


73,
Mark, N8ME

I'm running Linux Ubuntu,?
what would be a good C Compiler to use for learning C?
I'm using an online compiler I found at?,
not sure if it is the best
--
'72

With the release of Raspios Bookworm, Raspios Bullseye has become the legacy release and Buster is no longer available for download from the Raspberry Pi website.

Will sBitx run with newer versions of Raspios?
--
73,
Mark, N8ME