开云体育

One of these plugs into the first (leftward, towards the board edge) micro-HDMI socket and converts to the large HDMI plug. The other has a HDMI socket that mounts to the chassis.

I'm setting up a 2 Meter transverter to my uBITX. My normal setup is: 1) uBITX 2)Nm0S 4-S Tuner 3) Antenna My question is should the 2 Meter transverter go before or after the tuner? The transverter

Jack I installed it (V6) using a new Nano and the first time had to choose Uno instead of Nano as the board (using Arduino IDE) and the "new" rather than "old" boot loader. ?When trying to upload as

Got?n8me_2_vu3gao_mods loaded and green CAT , the Test PTT turns red. But I don't see that as TX on the Ubitx, or anything on the Ubitx change. Any ideas or settings?

Just wanted to say goodbye to everyone,and enjoy ur sbitxes,and such. Im changing paths in my Amateur radio career. Just going to buy USA made or make it myself. Not to be insulting to others, and

Hi Rolf, You can do the \help and \h2 commands to see a list of commands. The commands I have added are on help page 2 (\h2). I just did a push to git a few minutes ago updating the help screens, so

Temperature compensation is only part of the game. The other was using a coil form with stable temperature characteristics like ceramic.? Most ferrites and powered iron cores were to be shunned or

Hi Goody, is there a list of commands that are available? I like to update my sBitx version and try the new one. Thanks a lot for your effort Vy73 de Rolf, DL8BAG

I specify, I am currently working with a 12mhz SSB filter

Hello, a little code reading before my question on value of frequencies *Code UBITX V4.3* The uBITX is an upconnversion transceiver. The first IF is at 45 MHz. The first IF frequency is not exactly at

Did you install a micro HDMI socket on the back of the case? I was having trouble finding one.

In my development version I have updated the following: 1) There are now \reboot and \shutdown commands. For those who may be using the software in a multi-user system in the future, there is a

Hooray!! Thanks for sharing your good news! Gordon

John, if I may suggest, I would check the connection of the RPi4 and the digital module in your device. Or I pull it out and plug it back in. Maybe it fell apart during shipping? Just a hint. I don't

Good news!? I was shipped replacement boards for my non-working sBitx.? They arrived earlier today.? I've since installed them and now have a radio that receives signals!

Use IDM Internet Download Manager or IDM Integration Module in your browser. There is probably another download manager that can resume the interrupted download. -- Gyula HA3HZ

Gary Thanks for the tip - that did it. ?I put in Ashar's original firmware so that I could access the calibration via the push button in the encoder, calibrated the touch screen, and voila! So to

I got this one at the local Wally World. j5create USB to HDMI Adapter - Walmart.com <https://www.walmart.com/ip/j5create-USB-to-HDMI-Adapter/626586141?athbdg=L1600> It works really well. I’m using a

These guys have a couple kinds, Resonable values too: https://vetco.net/search/results?q=n750 https://thedhtsstore.com/search?type=product&q=n750

Someone please correct me if I’m in error but I don’t think it’s feasible to send a video feed from a raspberry pi to a monitor. That’s why there are two different types of connectors on the