Re: Latest Build, Mods and results.
My question above is regarding the fix to uneven TX output across bands.
|
Hi Derek
I'm interested
regards
LuisM
|
Re: For Sale: V6 With AGC mod
#ubitx
|
hello men
trying to install a nextion 2.8 screen after many trials I am getting a message '1st SD card update' then 'model does not match' device model nx 32242028_011R'.
Have loaded to micro sd card : -ubitx_TJC_28.tft.
Any ideas?
|
Re: uBitx Digi-Interface Module (Add-on Board)
Thanks Gordon,
I have mistaken yours for another digital board on that and someone followed up with your empty board. ?What I really liked about the other board which link is posted in the OM is posted, is that is came with the a RF out trim. ?I needed that as well. All this can be done with various parts but I liked the all in one board that has a sound fob, audio filtering and other options Mounted on it. ?Thanks for the encouragement that I could build my own and to explore the techniques to do so. ?I would like to try that in the future but for now I was just looking if anyone has the board from my OP.?
Cheers, 73 Joe KD2NFC?
toggle quoted message
Show quoted text
On Dec 29, 2019, at 4:25 AM, Gordon Gibby <docvacuumtubes@...> wrote:
? yes, kit-projects has been great to help make this available.? ?And the GERBERS? ( ) are out there for free and anyone can order 5 or 10 cards from china and have them in a week.? ?and learn a bunch in the process!? ? Point to point can always be done also -- there are a zillion different pages out there all with basically the same information, from which i learned as well.? ?Great chance to learn more about electronics.? homebrew "manual" also available:? ?? ? I went through various iterations, so you have to pay a bit of attention, but none of that is very crucial....using a 2.2K resistor instead of a 2K isn't going to make a hill of beans difference in that design, for example!!!? ??
Looks like there are still some bare boards available.? $3.
?
?
?- Bill
?
|
Re: New uBITX Ver. 6 Assembled Today
When I connect to the web page provided on my computer (Windows 10) without a microphone, I get just the instructions.? When I connect to the same page on my laptop, also Windows10, with a mic, I get the graphics showing the current audio spectrum.? See the screen shot in pdf format attached.
I would suggest you verify that you have a source of audio that the page can access.
73
Evan
AC9TU
|
Re: V6 alternative software
The simple answer is NO it won't. The display would have to be a NEXTION and connected properly. It would not be able to mount on the V6 Raduino as currently configured.
W0EB
toggle quoted message
Show quoted text
------ Original Message ------ From: "Richard Spohn" <wb2gxm@...> To: "BITX20" < [email protected]> Sent: 12/29/2019 4:42:02 AM Subject: [BITX20] V6 alternative software Will the CEC software work on the new v6 uBitx and its stock TFT
display? I much prefer the CEC GUI shown on the Nextion TFTs. - Rich
WB2GXM
|
Re: New uBITX Ver. 6 Assembled Today
OK. ?I downloaded the program in Chrome on my iPad Pro and get the very same thing I saw during the regular down load.... instructions but no program to generate to es or what ever it is supposed to do.
Dave K8WPE
On Sunday, December 29, 2019, 07:06:37 AM CST, Ashhar Farhan <farhanbox@...> wrote:
It requires chrome. Install chrome and check it out?
On Sun 29 Dec, 2019, 5:14 PM David Wilcox via Groups.Io, <Djwilcox01= [email protected]> wrote: So this won¡¯t work on an iPad Pro?? All I get is some instructions, but no working program.? Does this require an Android phone? David J. Wilcox K8WPE¡¯s iPad ?OK...!? Used the??website on my cellphone and it worked!? I can now hear a difference in filtering between LSB and USB.? Thank you.
Bert N8NN
|
Re: New uBITX Ver. 6 Assembled Today
It requires chrome. Install chrome and check it out?
On Sun 29 Dec, 2019, 5:14 PM David Wilcox via Groups.Io, <Djwilcox01= [email protected]> wrote: So this won¡¯t work on an iPad Pro?? All I get is some instructions, but no working program.? Does this require an Android phone? David J. Wilcox K8WPE¡¯s iPad ?OK...!? Used the??website on my cellphone and it worked!? I can now hear a difference in filtering between LSB and USB.? Thank you.
Bert N8NN
|
Re: V6 alternative software
Well if you replace the standard SPI display with a configured Nextion there is a good chance that the CEC sketch suitably configured will work.
|
Re: New uBITX Ver. 6 Assembled Today
So this won¡¯t work on an iPad Pro? ?All I get is some instructions, but no working program. ?Does this require an Android phone? David J. Wilcox K8WPE¡¯s iPad
toggle quoted message
Show quoted text
On Dec 28, 2019, at 7:27 PM, Bert N8NN <bertgarcia73@...> wrote:
?OK...!? Used the??website on my cellphone and it worked!? I can now hear a difference in filtering between LSB and USB.? Thank you.
Bert N8NN
|
Will the CEC software work on the new v6 uBitx and its stock TFT
display? I much prefer the CEC GUI shown on the Nextion TFTs. - Rich
WB2GXM
|
Re: FS: uBitX V5 Board Set - Brand New - Unused
Jim, is the v5 still available? If so I would like to purchase - Rich WB2GXM
toggle quoted message
Show quoted text
On 12/23/19, Jim WB2LHP in MI <jmarco1955@...> wrote: I just bought these but have decided to go in a different direction. These
uBitX V5 Main and Raduino boards are brand new, unused, in the original
packaging...$100 shipped...PayPal only...Thanks for looking...Jim WB2LHP
|
Re: [BITX20] FS: uBitX V5 Board Set - Brand New - Unused
Is the uBitx v5 still available? I am looking to purchase a new v5 uBitx, thanks - Rich WB2GXM
|
Hello Derek, ?????????????????? are the items still available?Regards Dave.
On Sat, 28 Dec 2019 at 15:39, derek (G4VWI) via Groups.Io <derek.g4vwi= [email protected]> wrote: I have lots of unused spares including a complete v4 board with raduino/display available.
Prefer to ship within the UK due to postal charges.
Having now completed a number of QCX and a uBitX projects someone may find these parts ideal for a new build or experimentation.
v4 board with raduino and display supplied in original plastic case plus leads plugs and sockets.
Axicom relays x5 [Farnell Code:2533099] new unopened package.
VK4PLN AGC board SMD fully populated [ND6T design unused].
VK4PLN AGC board SMD unpopulated [ND6T design new unused].
K5BCQ AGC x2 fully populated [not used].
VK4PP 45Mhz filter board x2 rev.03. Plus 45Mhz filters. Matched pair? [3 pin type T45U15BG new unused].
Nextion enhanced 2.8inch OEM display boxed. ALL ?70.00 including PP.
Many thanks. Derek G4VWI?
|
Re: TFT Raduino upgrade for V3 uBiTx ?
Hi, there are a TON of ways to replace the raduino, google is your friend, multiple people have provided different projects for that.? Adafruit has a product with the si5351 already solderred in, and you can leverage that product easily.? ?I created an external VFO using that board and publihsed the gerbers somewhere.? ?There are people here who have for-sale versions of more refined products.? ?Google is your friend!
I have an early V3 that I have managed to kill the Si5351 so was wondering if it is possible to upgrade the raduino to the new V6 type. My eyes are not good enough to replace the si5351. I have sent an email to hfsignals about 2 weeks ago, but have not received a reply.
Failing that are there any other raduino replacements out there that are worth considering?
--
Mike VK3XL
|
Re: uBitx Digi-Interface Module (Add-on Board)
yes, kit-projects has been great to help make this available.? ?And the GERBERS? ( ) are out there for free and anyone can order 5 or 10 cards from china and have them in a week.? ?and learn a bunch in the process!? ? Point to point can always be done also -- there are a zillion different pages out there all with basically the same information, from which i learned as well.? ?Great chance to learn more about electronics.? homebrew "manual" also available:? ?? ? I went through various iterations, so you have to pay a bit of attention, but none of that is very crucial....using a 2.2K resistor instead of a 2K isn't going to make a hill of beans difference in that design, for example!!!? ??
Looks like there are still some bare boards available.? $3.
?
?
?- Bill
?
|
|
|
you will have to write to hfsiganls@..., this group only discusses the technical aspects of the radio and we can help with getting it up and going. 73, f
On Sun, Dec 29, 2019 at 11:46 AM < rmvanb@...> wrote: Hello, i orderd my v6 complete pakkage last week. I payed by paypal but i didn't received any trackking code or anouncement that you received the mony and that you wil send it to my house in the Netherlands?????
Regards
Rene
|
Thanks Raj. I emailed then 2 weeks ago to that address and have not had a reply. I thought I may have had the wrong email address. Its Christmas so I will not get to impatient yet. I know they will be busy with all the V6 orders.
Thanks again, I will go back to waiting.....
--
Mike VK3XL
|
Steve - KE0VCD
N8DAH
Jim Sheldon
David Wilcox K8WPE