开云体育

Hi Kevin, The hmi/tft files over 2.8 are meant for you to resize yourself. It's not an easy task. I have several clean iterations for the 3.5". There are also a few floating around...you have to

Hi Dave, When you compile the .hmi, the tft goes to user\appdata\roaming\nextion editor\bianyi If you go to your file explorer, clear the top box, and type in %appdata% to get to the file

I have been looking at customizing nextion displays and have a what may be a silly question. I have imported hmi files into the nextion editor but how do I export as tft so that the display can read

All: Our site was hacked last week and our ISP wasn't too concerned with our small site, but it is back up now. We need to restore our database again, but we're getting there. Jack, W8TEEAl, AC8GY

I have found it interesting that toroids work when caps and coax don't work. Toroids are my go-to for rf noise. I use these internally in radios

Vaugh, it seems you have included the libaries for Adafruit Circuit Playground by mistake. These libraries should NOT be included in the sketch! In your sketch, look for following lines: #include

kevin -- I had the same problem with my 4.3 screen.? It is a bit of the wild west out there, so you just have to search, try and hope to find a TFT file that works for your screen. Sharpen your

Glad all good with your build. Any idea why mine will not compliie? Using the same sketch just keep getting the error message above. Thanks for any help you can offer Vaugh

47pf should be perfect but the inductor needs to be similar to L5/7 Raj

I have not tried this file from Ted in the following link, but it did work for someone else: /g/BITX20/message/67572 The issue is the .tft file is just a quick change to a compile

That worked for me using the old boot loader and yes the ten turn removed those annoying clicks. Now I find when getting close to the end of the tuning range the frequency gallops.. did I read that

Try with ide 1.8.5 Define mega328p old bootloder Regards Sarma vu3zmv

I have read all posts on this topic, but can't find the answer to my problem which is that raduino output does not fill the entire area of the nextion display. I have a 3.5 inch enhanced nextion. I

Thanks Raj. I'll pick up some 51pF caps Monday. My local parts shop gets worried if they haven't seen me in a day or two... I'll try parts I have on hand first.

John, see this earlier post of mine /g/BITX20/message/62097 Raj

Hi, been reading some of the topics here and yo are all very advanced for my build. I am only just starting so need some help please, I hope to add some of your mods later. I have a BITX40 and it has

The LPF as I have understood is aimed to remove some specific spurs. At 21.3mhz without the filter you should see a quite strong 23.7Mhz (21.3+23.7=45). If you don't even detect it, it means the LPF

Sorry missed the questions in the photograph. 1) Off and Ground are the same. To turn the circuit off you need to ground common. This removes the audio input to the circuit, and thusly turns off the

Hey Digger, Thanks for the feed back. So you are actually the second person to reach out to us about this. We realized this afternoon that the documentation was in error. I supplied david with the

Hey, I've installed the uBITX AGC board per the instructions and it just doesn't seem like its working correctly. I feel like I've gone round circles trying to make sense of it all. In part I wonder