开云体育

I vote for subgroups - *PLEASE!*

Allison If the IMD were "perfect" you would see two tones, period. :-) WA8TOD

Nikos,? I do have the 3.5" Nextion display (….T035-011) and would love to have the files (you can send them to jlauber@...).? As for changing the x,y, h and w values, in the Nextion

Actually all the uBITX message are NOT BITX20 related!

Warren, To that we are both in the same pew.? Bandaids are turning to cardiac surgery. Unfortunate that that is the case. I've gone back to modernizing a old atlas that was a parts dog for fun. A

Amen too ?

That assumes that the end users would use them properly. Its already impossible to get a thread to stay on topic. You can always set a thread to be muted if you don't want 300 messages regarding efhw

Amen! Roy WA0YMH wrote:

-- If there were only a couple messages a day it might make sense to keep everything together.? But I have received over 3000 digests, and it has become nearly impossible to determine which flavor

Alison i have put my uBitx on the shelf and plan no further work on it. Just too many issues trying to make a Ford out of a tricycle. I put these up as an assist for those still trying.? WA8TOD

Warren, That is indeed a mess. One place to look is pull power to the amp.? Look at the output of the 9 element 30mhz filter peak level should be under -10dbm.? ?The stuff you will see there is not

Distortion is the likely animal.? If its more than 40db down that is not bad and not to worry about it. To see IMD you need two equal tones inside the filter pass band with non harmonic relationship.

There are other versions of 2n2222 in SMT, DXT2222. The MMBTh10 is better than the 3904 as is the SMT 2n2369 (mmbt2369) and BFR106. As to voltage that spot (Q90)should not see more than maybe 16V

Mag loops...? Mis named.? ?Resonant small loop. They run about -12db on 40M for a soso one and maybe -10db for a good one compared to a dipole at 40ft or more.? This is for a 1M diameter loop at

Ajay, The map below shows most of my QSO's with a Myantennas EFHW-8010P fed with 50' RG8X direct from my ?BITX. ? -- www.bitxmap.com ( http://www.bitxmap.com )

IF we don't take advantage of groups.Io for other topic centric groups we end up with mush. Why do that?? Because people interested in antennas and not bitx interest will likely not look here. Might

Ajay, Just one clarification: You may use a 49:1 transformer or you may use a tuner. You do not need both. Have fun! WA8TOD

There is already a homebrew group and an antennas group. Splitting the radios up would just make a mess of things. Vince - K8ZW. -- Michigan VHF Corp. http://www.nobucks.net/ http://www.CDupe.com/

Breakout boards http://tinyurl.com/yaf8wcdh http://tinyurl.com/y988tcx9 http://tinyurl.com/y7rqndjo http://tinyurl.com/y7be88cf _._

Cheers!