Re: Nextion display bezel
Gary
I selected PETG. looks great
73
Art N2AJO
toggle quoted message
Show quoted text
On Jul 5, 2018, at 8:22 AM, Gary Hanson <grhanson@...> wrote:
Art Olson,
When ordering a bezel for the Nextion display, I noticed that 3D Hubs offered 8 different types of plastic options. I wondered what you used?
Gary Hanson
|
Thanks for good adress.
?A little bit more expensive than from China (i am not a Prime member). And no shipping to France... Snif...
73
|
Re: Easy, Inexpensive Cooling Fan, Excelway Case
Thanks Mike for highlighting my misunderstanding about how CW is implemented on the uBITX!
I should have reviewed the source code / schematics before posting, pretty obvious when I look at it :)
.. the difference between energizing the "TX" and the "CW-KEY"
Best Regards,
Gary
|
|
|
Judd
Great job. I added a button also. Easier to access menu. Where did you get your folding kickstand?
toggle quoted message
Show quoted text
On Jul 5, 2018, at 8:55 AM, pat griffin < patgriffin@...> wrote:
Nice job.
Also, I see you are using the S meter and v 1.094 firmware as am I. Can you tell me the range in uBitx Manager you are seeing for the s-meter readings and if you are using the AGC circuit?
Thanks,
Pat AA4PG
Updated picture.
I added a momentary button just right if the VFO to access the menu options so I wouldn¡¯t have to push the VFO, which I still can. ?Also added a folding kickstand so when on the bench the front is elevated.
--
Judd, WD8WV
|
That's not necessarily bulletproof, either, but a step in the right direction. Try this:
void setup() {
? char temp[5];
? int val = 0;
? Serial.begin(115200);
? while (!Serial);??????????????? // Necessary on some faster Arduinos, like the Due
? strncpy(temp, "12345", 5);
? Serial.print("temp = ");
? Serial.print(temp);
? Serial.print("# val = ");
? Serial.println(val);
}
void loop() {
}
It prints out "12345". The fact that it prints out the entire string means the string termination character is stored...where? The documentation for strncpy() states:
????No null-character is implicitly appended at the end of destination if source is longer than num. Thus, in this case, destination shall not be considered
????a null terminated C string (reading it as such would overflow).
Moral: The strn*() function don't guarantee? protection against buffer overflow. It simply means you're thinking about it.
Jack, W8TEE
On Thursday, July 5, 2018, 8:56:00 AM EDT, Brian Bowling <bowlingb@...> wrote:
How about making your programming safer and more robust? ?Strcat() and strcpy() can be found at the root of so many buffer overflows. If you must use them at least use the 'n' versions strncpy() and strncat().?
Brian
|
How about making your programming safer and more robust? ?Strcat() and strcpy() can be found at the root of so many buffer overflows. If you must use them at least use the 'n' versions strncpy() and strncat().?
Brian
|
Nice job.
Also, I see you are using the S meter and v 1.094 firmware as am I. Can you tell me the range in uBitx Manager you are seeing for the s-meter readings and if you are using the AGC circuit?
Thanks,
Pat AA4PG
Pat Griffin
http://www.cahabatechnology.com/aa4pg.html
toggle quoted message
Show quoted text
Updated picture.
I added a momentary button just right if the VFO to access the menu options so I wouldn¡¯t have to push the VFO, which I still can. ?Also added a folding kickstand so when on the bench the front is elevated.
--
Judd, WD8WV
|
On Thursday, July 5, 2018, 8:27:52 AM EDT, WD8WV <juddie.d.burgess@...> wrote:
Updated picture.
I added a momentary button just right if the VFO to access the menu options so I wouldn¡¯t have to push the VFO, which I still can. ?Also added a folding kickstand so when on the bench the front is elevated.
--
Judd, WD8WV
|
Also available from Amazon with 2 day shipping if you are a Prime member:?
|
Updated picture.
I added a momentary button just right if the VFO to access the menu options so I wouldn¡¯t have to push the VFO, which I still can. ?Also added a folding kickstand so when on the bench the front is elevated.
--
Judd, WD8WV
|
It is a 2.8 Nextion screen. ?Thanks!
--
Judd, WD8WV
|
Art Olson,
When ordering a bezel for the Nextion display, I noticed that 3D Hubs offered 8 different types of plastic options. I wondered what you used?
Gary Hanson
|
Jean-Luc,
Thanks for sharing your BitX modifications, especially the Analog S meter. I collect D'Arsonval meters and like the retro look for my radios.
73, Bob W4RJP
|
Replaced both IRF510 with lead-free version.? Used insulator kit.? Installed fan.? Did PA bias. Up and running again. Thanks for all suggestions.?
Bill
K0WHW
|
Thanks very much for the kind compliments. I hope this project turns out to useful to others on this forum.?
I tried to make it relatively easy to use, and easy for the user to add custom functionally that can offload some work from the uBITX to the backpack.
As this is the first release, I hope there are only very minimal hiccups in the code.
Tom, wb6b
|
BITX QSO Afternoon/Evening, Sunday, July 8, 3PM & 7PM Local Time, 7277 kHz in North America, 7177 kHz elsewhere.
BITX QSO Afternoon/Evening, Sunday, July 8, 3PM & 7PM Local Time, 7277 kHz in North America, 7177 kHz elsewhere.
Join us as we make contacts with our BitX-40s or uBitXs or anything else on 7.277 MHz in 40 meters!
This is a worldwide event for BitX40 (and other QRP)?stations starting at 3PM and 7pm in each time zone. To participate, call CQ BitX on Sunday, starting at?3PM and/or 7PM?your local time. The BitX QSO Night continues through the evening and conditions usually improve after sunset, so it is worthwhile to participate later in the evening.
Suggested Best Operating Practices:
Work at QRP power levels unless conditions require more power.
Call and listen for CQ BITX on the hour and every quarter hour.
It is helpful if you call CQ BITX with your callsign, name and location.?
Repeat your callsign a number of times during your CQ BITX and during QSO's.
Start a QSO by confirming the callsign, location, name and signal report of the other operator.
Say the callsign, name and location of the other operator so others can hear.
If the frequency is busy, avoid long conversations.
After your initial QSO is complete, ask if there are any other stations who would like to contact.
Report your QSO's, discuss propagation, noise, signal reports, audio reports, antenna type, etc. in this thread.
This is an undirected, scheduled event.? The BITX QSO Night relies on you to call CQ BITX to initiate contacts with other stations, so warm up that final and transmit a few calls on Sunday evening.? Talk to you then!
--
John - WA2FZW
|
A small comparaison between Ubitx, HW101 Heathkit and a 51S1 Collins.
Ubitx: not too bad....
73
Jean-Luc
F6HOY
|
Just for fun for 15€... On my first Bitx40 i added an analog smeter with simple circuit on audio line and a 500 microA vu-meter. Al was fine except that without AGC it is just a signal level. On my Ubitx i add a Chinese Audio Vu-meter that is better... Around 15€ with a circuit and 2 vu-meters. And with the input circuit it is just like an AGC. For fun i have nice warm lights.. And for the same price you have another Vu-meter and a second input.... sevral shops in China. For axample: (the hole in front panel is not perfect. I am going to make a new panel...)    Radio is magik ! 73 Jean-Luc F6HOY
|
Re: Bitx40 75KHz Spurious, How to solve it.
#bitx40
Dear Jerry aa1of,
The modification for suppress the spurious of this time is as follow.
I hope this would be useful for you.
?
1) Add 3.3uF electrolytic capacitor and 0.1uF x 2 bypass capacitor to VCC line of Arduino board =>PIC1-1a? PIC1-2a
2) Insert high frequency choke of about 100 uH in the power line of Arduino =>PIC2a
3) Connect the minus line of power supply line to the ground =>PIC3-1a ?PIC3-2a
4) Connect the minus line of BITX40s to the ground
5) Add 0.1 uF ¡Á 2 bypass capacitor to VDD of BITX 40 board=>PIC5a
6) To prevent common mode noise, add 0.01uF x 2 bypass capacitor to the power connector=>PIC6a
73!
Akira
JJ1EPE
|
JEAN-LUC F6HOY
Skip Davis
Brian Bowling
WD8WV
