开云体育

If I made it, I would, but it was purchased from the kind gentlemen at http://cwmorse.us. I don't have the print files myself, and as they're selling 'em, I doubt they're going to put the files on

I found that there was a removable insert on the knob,made it a little too loose but built up diameter of encoder rod with insulation tape. Works well. John Vo1jcc.

Whose firmware is using this "ALS" Tuning ? Or are you referring to some of your past projects vs. the uBITX? Pete WK8S

Take a look on Amazon, read the reviews, and then decide if you think it will work for you. Also, you can click on the cover image and look at the TOC and/or some pages if you want. Jack, W8TEE

Just discovered you've written one Jack LOL :)

Thanks Jack - some top tips there :-)? Up until a couple of years ago all my programming was PIC chips and assembler so I'm a bit of a novice with the Arduino and have learned on-the-job as it

Almost looks like a do not enter sign?

Good idea, but I hot glued the fan to the case.? Even cheaper than screws.? I could hot glue a piece of screen to it, too. Besides, my local hardware store wanted 13? for one piece of 3mm nut!?

BITX QSO Afternoon/Evening, Sunday, July 1 (Happy Canada Day, Tom!), 3PM & 7PM Local Time, 7277 kHz in North America, 7177 kHz elsewhere. Join us as we make contacts with our BitX-40s or uBitXs or

You could always go to the hardware store and get some heavy duty screen wire, cut a grill out, and attach it with the same screws you use on the fan. They even make a black screen just for keeping

Good idea! See...that's why I'm not an EE kind of guy! Jack, W8TEE

Why not wire the fan into the TX power circuit so the fan is on only during TX?

Changing out those transistors have minimal to no effect for the lower bands.? It was part of the chase for power at 10M and while I did get far better power the spur was amplified as well.? For me

If you're of a mind to allow imitation, you can upload the files and pictures of your key to Thingiverse. ( https://www.thingiverse.com/ ) Dale W5OHM

Well, it's alive! I still have to finish the mike, but I got it working in CW to test it. I'll finish building the mike in the next day or so, and hopefully I'll be on SSB by the weekend. I used my

Hello Marco, it’s 13.8 V ( via a buck boost). See my earier posts. Mike N6CMY

Hi Mike, Is that at 12v PA voltage or higher? Thanks Marco - KG5PRT

UPDATE. In addition to my earlier? mods I have incorporated Allison's mods (substituting 2n2222's and a BFR106 for the 3904's). In terms of output power the results are impressive. But in terms of

Sorry - my error. I meant Q10,11,12 and Q20,21,22 - I thought I had the correct numbers in my mind and did not check again. I bought them from a well known distributor here and the markings seem to be

*I'm just seeing the two dots with negative signs in the middle too.? * Daniel, W2DLC